1990 e30
-
Clear when turning under load too?
-
Clear when turning under load too?
Well if having the spring removed and the shock completely compressed counts as “under load” then yes. Lol
-
Well if having the spring removed and the shock completely compressed counts as “under load” then yes. Lol
Just wanted to check lol. Didn’t see any pics of the wheels turned
-
Just wanted to check lol. Didn’t see any pics of the wheels turned
My bad, in the third picture, which is very close up; that is taken at full lock.
-
My bad, in the third picture, which is very close up; that is taken at full lock.
My eyes deceived me lol
-
Shit and I worried that 245s wont be enough for my m42t e21
Will 16s clear stock e36m3 or e46 330i brakes?
There are some 16's that will clear e36m brakes, but not the majority. As far as I know, no 16 will clear e46 330 brakes as they are slightly larger than e36m.
-
16" contour reps clear e46 330 brakes. I have test fitted that combo. Clearance is about 1/8"
I stand corrected! Always thought they were just too big, good to know
-
Shit and I worried that 245s wont be enough for my m42t e21
Will 16s clear stock e36m3 or e46 330i brakes?
Plenty of room, just need the right offset!
Good info. I didn't want to risk the wheels not fitting with the 330i brakes.
For some reason I get no notifications of posts even though I have the notifications turned on. Is this a common issue with the forum?
Finally got the car on the ground. I approve. NO POKE!
-
My eyes deceived me lol
Nope just a shit picture
-
Plenty of room, just need the right offset!
Good info. I didn't want to risk the wheels not fitting with the 330i brakes.
For some reason I get no notifications of posts even though I have the notifications turned on. Is this a common issue with the forum?
Finally got the car on the ground. I approve. NO POKE!
Dang, that fitment is great, way better than e36 parts.
-
Dang, that fitment is great, way better than e36 parts.
Thanks bud I wish I would have taken a picture from the side. Car is back on jack stands now...
-
Thanks bud I wish I would have taken a picture from the side. Car is back on jack stands now...
Any idea how much camber you're running in the front? I'm debating switching to this setup at some point for a number of reasons.
-
Any idea how much camber you're running in the front? I'm debating switching to this setup at some point for a number of reasons.
I have factory upper strut mounts and IE3 springs. Once I get it in for an alignment this spring I can certainly come back and post a number for you if you would like.
-
I have factory upper strut mounts and IE3 springs. Once I get it in for an alignment this spring I can certainly come back and post a number for you if you would like.
Ah gotcha, for some reason I thought you were running coils/camber plates. Thanks! Good to know you can fit a decent tire without leaning them way in
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login