1990 e30
-
I did a test on the effectiveness of the venturi jet pump. It was able to pump 1 gallon of fuel to the other side of the tank in 36 seconds with fuel pressure holding solid at 43psi. There was a fu*king tornado in the tank lmao. Very impressed.
I've added a turbine back pressure sensor and a 3 port boost control solenoid. All plumbed and wired in...
-
What’s the idea with das loopinator?
My guess is heat, helps protect the sensor probably
-
Throwing a guess in for vibration resistance given that it’s all hardline
-
What’s the idea with das loopinator?
My guess is heat, helps protect the sensor probably
Correct, the loop serves to dissipate heat from the exhaust gasses passing through before reaching the pressure sensor. It also dampens the exhaust pulses as they pass through the tubing and absorbs vibrations. I also installed a 0.04" restrictor/damper just prior to the sensor just to make sure the readings are stable.
-
Been awhile, here are some updates on the car.
Finally got around to installing the remote brake bias adjuster.
I got some new front wheels and tires. The tires rubbed on the factory wheel well liner so I made some new ones from hdpe. They clear with about a 1/4" to spare! Don't mind the socket spacer, I have some proper spacers on the way from McMaster along with some button head screws to replace those hex heads.
Yes, transmission jack...the spring is removed.
-
Clear when turning under load too?
-
Clear when turning under load too?
Well if having the spring removed and the shock completely compressed counts as “under load” then yes. Lol
-
Well if having the spring removed and the shock completely compressed counts as “under load” then yes. Lol
Just wanted to check lol. Didn’t see any pics of the wheels turned
-
Just wanted to check lol. Didn’t see any pics of the wheels turned
My bad, in the third picture, which is very close up; that is taken at full lock.
-
My bad, in the third picture, which is very close up; that is taken at full lock.
My eyes deceived me lol
-
Shit and I worried that 245s wont be enough for my m42t e21
Will 16s clear stock e36m3 or e46 330i brakes?
There are some 16's that will clear e36m brakes, but not the majority. As far as I know, no 16 will clear e46 330 brakes as they are slightly larger than e36m.
-
16" contour reps clear e46 330 brakes. I have test fitted that combo. Clearance is about 1/8"
I stand corrected! Always thought they were just too big, good to know
-
Shit and I worried that 245s wont be enough for my m42t e21
Will 16s clear stock e36m3 or e46 330i brakes?
Plenty of room, just need the right offset!
Good info. I didn't want to risk the wheels not fitting with the 330i brakes.
For some reason I get no notifications of posts even though I have the notifications turned on. Is this a common issue with the forum?
Finally got the car on the ground. I approve. NO POKE!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login