Shop flooring stupid cheap
-
I have roughly about 19,000 square feet of suspended modular flooring. I used about 1000 sqft for parking vehicles on and have no use for the rest.
I am selling them at
•••$0.75 a tile••• OR LESS
•••$0.25 a tile••• OR LESS
(New they are $4.17 a tile)
If you bundle and buy more than 1000sqft, I will greatly reduce the price.
The Tiles are LIGHT BLUE in color.
—-DATA—
190'x100'
19,000 square feet
27360 tiles
294120 oz of tile
or
18,382.5lbs of tile
Pack of 24 tiles is $100
Total cost NEW: $114,000
SnapSports ReActive
suspended modular flooring – Solid top design9.8425" x 9.8425" x 3/4" (250mm x 250mm x 19mm)
High impact PP (polypropylene) suspended floor tile with 841 individual support legs.
Weight: 10.75 oz. (304.79g)
PRODUCT TEST RESULTS • Flame Spread Index (ASTM E 84): 90 • Smoke Generation (ASTM E 84): 90 • Friction (ASTM C 1028): Dry – 0.74, Wet – 0.53 • Compression vs. Crush (ASTM D 3998): No Break • Noise Reduction Coefficient (ASTM C 423): 5 - 10% • Rolling Load (DIN 18032-02): Pass • Force Reduction (ASTM F2772): Class 1 • Standard Deformation (DIN 18032-02): 0.9mm • Ball Rebound (DIN 18032-02): 98% • Load Bearing Capacity (DIN 18032-02): >200 psi • R-Value: x<1 • Flatness: 0.0mm • Lateral Movement: 0.00" – 0.035" SANITARY INFORMATION • Fungus Resistance (ASTM G 21): No Growth • Resistant to the following: – Bacteria and Mildew – Staphylococcus – Klebseilla Pnuemoniae – Pink Staining Organism – STV Reticulum • Tested and Certified by the NSF (National Sanitation Foundation)







-
Where are these located?
-
You'd most likely have to use something under a jack/stand to protect the point loads from cracking the floor, i.e. piece of plywood or sheet metal.
@Jdesign I'm still in. I have to do some maths to see what I need and how big of a pile that will be for me to pickup, but around 500 tiles.
FYI for everyone, I talked to the rep for Wisconsin (Chase) from the company that makes these and they will sell small amounts of the ramp edges to anyone. They are $2/piece and are 2"x 9.8425" available in grey or black.
-
You'd most likely have to use something under a jack/stand to protect the point loads from cracking the floor, i.e. piece of plywood or sheet metal.
Would pulling into a garage and backing in and out turning the wheels on these cause them to shift or move at all? One of our garage stalls will eventually be a little tricky to get into and would require some maneuvering.
-
Where are these located?
Cottage Grove, Wisconsin
The pictures aren't working for me. Are they for anyone else?
Also, are these just for parking cars on? I assume with them being plastic you couldn't use a jack or jackstands on these?
You can use jack stands, floor jacks, etc. they are strong.
You'd most likely have to use something under a jack/stand to protect the point loads from cracking the floor, i.e. piece of plywood or sheet metal.
@Jdesign I'm still in. I have to do some maths to see what I need and how big of a pile that will be for me to pickup, but around 500 tiles.
FYI for everyone, I talked to the rep for Wisconsin (Chase) from the company that makes these and they will sell small amounts of the ramp edges to anyone. They are $2/piece and are 2"x 9.8425" available in grey or black.
I will save you some! Can you send me Chases info? I would love to get some ramp edges.
Would pulling into a garage and backing in and out turning the wheels on these cause them to shift or move at all? One of our garage stalls will eventually be a little tricky to get into and would require some maneuvering.
Yes and no. typically these should have an underlayment, but I have then down with just concrete under them. you can turn on them just fine but obviously the bigger the area the less likely you will see shifting.
** Note that my E36 has a welded diff and I tried turning on them with the rear tires near an edge of about 1200sqft and it just twisted a few tiles apart. I had to get out and snap them back together.**
-
The pictures aren't working for me. Are they for anyone else?
Let me know if this helps:
https://www.facebook.com/marketplace/item/410129909663903/?ref=messenger_banner
https://madison.craigslist.org/for/d/cottage-grove-garage-shop-gym-suspended/7014065612.html
-
you could always mechanically fasten trouble spots or tiles near edges. if you don't mind a hole or two in your floor, a modified truss head screw and a wedge anchor could work.
-
I will save you some! Can you send me Chases info? I would love to get some ramp edges.
just call the 800 number and ask for the Wisconsin sales rep named Chase. That's how he suggested I call him back. 800-664-3865
-
doing my maths...are these a 10" nominal tile?
-
doing my maths...are these a 10" nominal tile?
For the most part, yes.
9.8425" x 9.8425" x 3/4" (250mm x 250mm x 19mm)
They are metric.
But I can give you a bunch extra, just get the rough area.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



