E30 Bi-Xenon Kits? Headlight upgrades?

[straight6pwr]

$200 for depo headlights (ebay) and yes, 'gutted' the new lights. (merely removing the projector from the low beam housing and putting the retrofit in its place.) you can do this retrofit to any projector style e30 lights, so if you have some already there is no need to buy new ones. I wanted smoked lights, though. 

My order from theretrofitsource, which cost $225 with a holiday sale 

 

 

 

 

HID Ballasts

 

 

 

2 x 50w / D2S: Morimoto XB Ballast

BL22

 

 

D2S HID Bulbs

 

 

 

2 x D2S: XB 3800K 

B630

 

 

Wire Harness

 

 

 

1 x HD Relay: 9005/9006/9012/H10 

H10

 

 

Bi-Xenon: Morimoto Mini D2S 4.0

   2 x Projectors

P-M-D2S4

 

 

yes, you have to rip the tape off the rear to replace the bulb.its really easy, and i've only had to replace 1 HID bulb in about 7 years of owning cars with HID retrofits. 

yeah, someone was making adapters but i think they were for euro lights only. so hella, bosch, or depo euro lights and not hella U.S. spec

[fnf01]

Thanks!  I'm gonna take the plunge and start gathering parts to do this.

[straight6pwr]

make sure you get the projectors as level and straight as you can in relation to the glass of the low beam bucket. there is only so much adjustment in the stock adjuster screws

also, e30s have no horizontal leveling in the system other than tilting the whole headlight assembly so you have to get the levelness of the cutoff nearly perfect as well. test and double check your alignments in stages so you don't have to back-pedal a ton.

[fnf01]

Just got back from a trip to get parts managed to snag a set of US Hella Ellipsoids.  Is it possible to use these for the bi xenon conversion? Blasphemous to do so?  Should I sell them and use profit to fund the conversion with above mentioned parts?

Not attached to these at all, just got a great price and figured to use them or sell to fund as bi xenon performance is what I’m after.

[straight6pwr]

no reason they shouldn't work.

i would attempt to add back the desiccant vent thats on the back of the original projector bowls, though. its a little while valve looking thing with the black rubber sleeve. it allows moisture that gets into the headlight to escape. on e30 headlights, the original sealing/venting system is disrupted with a retrofit, so you'll always have some moisture that finds its way into the headlights, so it needs a way to get out.

[GunMetalGrey]

Slightly off topic, but I'm contemplating playing with headlights more so than I have before.
I took on my first headlight project a few weeks ago and was greatly pleased by the results, and I had a fair bit of fun while working on it.

The headlights in my truck have always been just okay, and as many of you likely know, I don't have great eyes so I typically chase down the best lights I can get. Nissan never provided these trucks with projectors so I decided to crack my set open and make some things happen.

Stock headlight for reference.

Armed with an inexpensive set of Mini H1 Bi-Xenon projectors and an oven I got to work. 
Baking headlights has always scared me, but after doing it I would comfortably do it 100 times more.
Trimming some bits allowed me to slip the projector through the existing bulb hole, and I routed the shutter wires up through a grommet type tape that was sealing a hole. 

After putting the projector in you need to make sure you've got everything level, as those cutoffs are going to be hell to rotate once you get the lens back on. 
Back in the truck they went, with a halogen bulb for testing purpose. Level out the cutoffs and the mark everything well so you know where you need to align it in case it spins again.

Lows (truck is at a slight angle)

High

TLDR;
Lights are fun
Buy things from TheRetrofitSource, they blow DDM kits out of the water.
I should crack open some E30 headlights and play. 
Bi-xenon's are sweet, this thing absolutely pours light out of the front with the highs on.

[straight6pwr]

nice! glad to see others benefit from proper lighting. your pictures arent working, though, and i really want to see them!

[GunMetalGrey]

Pictures are working on my computer and on my phone, not sure what could be going on with your end.

[straight6pwr]

i get blank boxes (Chrome) on my phone

busted links (Microsoft Edge) on my PC

[YoungCR]

GunMetalGrey said:

Pictures are working on my computer and on my phone, not sure what could be going on with your end. 

I'm guessing they are hosted on google photos? It seems that hotlinking images is not allowed, you'll have to upload them on here. The garbled text is the image ALT tag, but I tried copying the URL you used and I just get a as the replacement still.

[Earl]

I also cannot see these pictures

[GunMetalGrey]

The Google Photos thing makes sense, I guess I thought It was just copying the image and hosting it here but I now realize that didn't make sense.
Switched em over to flikr links, should work now.

[straight6pwr]

nice work! looks like you went with the 3800k? I love the near halogen color, and they are brighter than the whiter colored bulbs.

[Jdesign]

These look great. any pics of what they looked like on the back of the headlight housing?

[GunMetalGrey]

straight6pwr said:

nice work! looks like you went with the 3800k? I love the near halogen color, and they are brighter than the whiter colored bulbs.

Thanks! Those were the halogen bulbs I used for testing before committing to buying xenons. I went 5800k per my usual. 

Jdesign said:

These look great. any pics of what they looked like on the back of the headlight housing?

I don't have any pictures of the backs, it honestly looks the same as stock though. 

I forgot to add the pictures with new bulbs in, so I threw those up in the original post.