Diaries of a Daily Driver
-
Turns out this speed was super accurate.
45mph she really came alive, this wasn't too surprising as I have determined most ball joints are bad in the current axles. New axles seem to have better ball joints so that should help.Did my first off-road adventure with it and holy crap driving manual in demanding off-road terrain is a wild time. I should be good at dancing after this!
Slipped a front wheel into a pond, whoops.
-
I forgot, I ran this into a tree lol
Bought another XJ that night for $250 non running, pulled the front clip, cluster, and various driveline parts.
Also got a CB in the deal
Breaker 1-9Picked up lockers for the new axles, will get those in process soon.
-
I don't understand. Must be a Jeep thing.
It was a time trial setup on memorial day weekend at a friends place.
Turns out I was going a bit quicker than I should have been. -
Makes sense with the lack of tread that your tires have. Time for some Mud Grapplers or Open Country M/T's.
-
Makes sense with the lack of tread that your tires have. Time for some Mud Grapplers or Open Country M/T's.
Must be photos or mud packed, as they're at 15/32's or about 85% tread
It was more likely the liquid encouragement along with passenger encouragement lol.
-
Jeep got parted out awhile ago, wasn't sure what my living situation was going to be and the thing needed a trailer to get anywhere to play. Made money on the whole ordeal so it's cool.
-
I've been low key looking for an E92 M3 for a year or two now, and have had little success in finding what I was after. Recently a forum members old M3 went up for sale for a staggeringly good price, but there was error in communications and it went to a dealer who then wanted 5k more than they got it for and wouldn't budge on it. Since then I had been keeping a more serious eye out.
This popped up the other day so I contemplated it for a day or two (that s52 head rebuild was not cheap) and decided to go look at it and deal with my decisions later. Needless to say it came home with me.
Awesome dealer specializing in higher end cars, he appreciated how thorough I was being in my inspection and questions and he was very honest with me about the whole thing. We struck up a deal and away I went.
Also got a ride in his FBO F90 M5 with meth that was ~800 AWHP and holy hell I have never felt something launch like that before.Anywho
08 M3 6mt 105k, carbon roof, black interior, premium and comfort package, Vorsteiner wheels, KW coils, glorified straight pipes on it (zero rasp, sounds amazing, just a bit loud inside)
It has been a riot thus far
-
I've been low key looking for an E92 M3 for a year or two now, and have had little success in finding what I was after. Recently a forum members old M3 went up for sale for a staggeringly good price, but there was error in communications and it went to a dealer who then wanted 5k more than they got it for and wouldn't budge on it. Since then I had been keeping a more serious eye out.
This popped up the other day so I contemplated it for a day or two (that s52 head rebuild was not cheap) and decided to go look at it and deal with my decisions later. Needless to say it came home with me.
Awesome dealer specializing in higher end cars, he appreciated how thorough I was being in my inspection and questions and he was very honest with me about the whole thing. We struck up a deal and away I went.
Also got a ride in his FBO F90 M5 with meth that was ~800 AWHP and holy hell I have never felt something launch like that before.Anywho
08 M3 6mt 105k, carbon roof, black interior, premium and comfort package, Vorsteiner wheels, KW coils, glorified straight pipes on it (zero rasp, sounds amazing, just a bit loud inside)
It has been a riot thus far
I don’t think I could possibly be any more jealous. I’d do anything to just hear a perfect rev match down shift, gotta send a lil tingle down the spine. Congrats, this is an absolute beautiful car/spec!!
-
I don’t think I could possibly be any more jealous. I’d do anything to just hear a perfect rev match down shift, gotta send a lil tingle down the spine. Congrats, this is an absolute beautiful car/spec!!
The perfect rev match downshift with three pedals is a thing of glory, and I manage to get them perfect about half the time hahah.
Drivers side audio sound a tad bit like tin. Played with it and found the drivers side underseat sub to be dead. Unbolted the seat and took the cover off for the speaker and was greeted by a non stock low range speaker. 9v test proved it was dead, so will need to replace that.
Other than that so far so good
-
I think you have to keep the white E30 now with having this. Think of the Instagram likes!
Ah yes, instagram likes, my primary concern!
-
A couple small fixes
The drivers side headlight had its vertical adjustments backwards, Lee noted the SMC is the module responsible for these things, and that module helped me google my way through finding out the reset through ProTools (possible best $150 license I've ever bought). After a recode the headlight went right where it should and all motor directions are correct.
Drivers mirror was drifting around between drives which was annoying. Found a thread linking this issue to corroded pins in the mirror motor connector, so I pulled it all apart, cleaned up the contacts, and applied a smidge of dielectric grease before reinstalling. It seems 99% of people have had success with this, so I hope I keep the trend going!
The driveway situation, before I put the truck in front of the 128 and E30
-
The best angle for an E92 M...
Short exhaust clip for the kids
I replaced the plugs, and it makes me sad how bad the old ones were.
This thing is a f*cking riot to drive
-
Exhaust drone from 1800-3000 rpm is a bit.. strong.
Found a stock muffler for $20 right near my house, so I went and picked it up. Installed it, started it, rolled back under the car and took it out, way too quiet. Will be cracking it open and replacing one of the perforated tubes in each side to get some volume out of it.
Current exhaust is interesting, and done well. At this point those cans are completely empty though. I will be grabbing some mufflers to replace them with as well and see how that goes. $50 for some cherry bombs cant be worse than it is haha.
All to avoid spending $700 on the muffler I truly want.
A friend has a set of quick jacks, these things are really slick, and for $1300 it is a pretty sweet option. The older I get the less I care to jack up a lowered car and put it on stands...
I've been working on a priority list of things I want to do on this car, as none of it is cheap. Wheels / tires could stand to be replaced and the engine / driveline could use some maintenance. I miss having a proper winter that keeps me from wanting to drive cars, they don't salt anything out here so it is just a slide-fest.
I don't want to sell my other cars (E30's) but man I haven't touched them
-
We got a bunch of snow recently, had to move the M3 out of the garage to work on other things. She didn't like the cold.
Ordered rod bearings, motor mounts, and exhaust gaskets.
I really enjoy this thing. I have neglected all other vehicles since obtaining the M3...
-
We got a bunch of snow recently, had to move the M3 out of the garage to work on other things. She didn't like the cold.
Ordered rod bearings, motor mounts, and exhaust gaskets.
I really enjoy this thing. I have neglected all other vehicles since obtaining the M3...Sure the S65 is like the S54 with constant debate about which bearings are the best, coated vs non coated etc. Curious what you ended up going with?
-
Sure the S65 is like the S54 with constant debate about which bearings are the best, coated vs non coated etc. Curious what you ended up going with?
You are oh so correct about there being thousands of posts and debates about what is best.
I avoided coated bearings as it seems they are typically coating stock sized bearings, which is extra not good.
I went with BE bearings and bolts, as it seems they are the most consistent in sizing and you are basically paying for them to check and provide matched sets over something like ACL's where you want to mix shells to get extra clearance but not too much. I don't want to have to be in there twice so the extra couple dollars for QC is worth it to me.
In looking at the journal dimensions and bearing tolerances I quickly understand why these have bearing failures, that's a damn tight clearance!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login