Diaries of a Daily Driver

[Jdesign]

GunMetalGrey said:

But like, who buys tires for stock wheels?!

This is how it begins. You can't have aftermarket wheels with stock suspension.

[GunMetalGrey]

Jdesign said:

This is how it begins. You can't have aftermarket wheels with stock suspension. 

I am impressed how low these cars are from factory, but I cannot confirm nor deny my current browsings of aftermarket spring options.

Funny note, stock suspension out here in WA lasts a long time, the roads are so good!

[GunMetalGrey]

Incomplete photo, but you'll have that from time to time.
Fresh meats, fresh kicks. 
Old tires were worn out, and I like the look of 18's over 17's on these cars.
Konig Hypergrams and some Federal Evoluzion's. Should prove to be a fun combo. The wheels alone weigh around 5lb less per corner when compared to the stock wheels.
Centercaps were installed after this photo. Note that the front right corner is a bit lower than normal due to a slight driveway slope. 

This certainly isn't my normal style of wheel, but they look pretty good in person.

Slightly blurry sunset picture off of the back of our patio tonight, just because.

[Jdesign]

What's up with that Aspen white head gasket machine in the backdrop?

[patsbimmer1]

It's looking good!

[B C]

Gr8 choice of colour, m8!

[GunMetalGrey]

Jdesign said:

What's up with that Aspen white head gasket machine in the backdrop? 

Haha, I give him shit for it all the time. 

It's actually a pretty sweet build, sounds like a Honda lol.

[Jdesign]

GunMetalGrey said:

Haha, I give him shit for it all the time. 

It's actually a pretty sweet build, sounds like a Honda lol. 

I like blobeyes the most, and an Aspen one is choice. I just hate how annoying the engine layout is. Need a hose? TAKE APART THE WHOLE INTAKE MANIFOLD.

[B C]

[GunMetalGrey]

Center caps on
Really digging the new wheels, and the tires are quiet which is nice.
Next up is some exterior add on's I think!
 

Fitment turned out very tidy for not having spacers or anything of the sort.

Added some LED interior lights

Added LED reverse lights that are actually bright

And a random scenery shot for fun

[KaiserRolls]

Hypergrams look nice

[HipMF]

GunMetalGrey said:

And a random scenery shot for fun

Where is that? It looks quite dry.

[GunMetalGrey]

HipMF said:

Where is that? It looks quite dry.

Quincy, WA 

It's right before the western mountains start. 

The middle of Washington reminds me of Colorado in terms of soil type

[GunMetalGrey]

Turns out this does snow fairly well, didn't expect it to float on top but it did!
Mountain snow is wild, and deep as hell.

[KaiserRolls]

GunMetalGrey said:

Turns out this does snow fairly well, didn't expect it to float on top but it did!
Mountain snow is wild, and deep as hell. 

The mountains are so good

[GunMetalGrey]

Well she's no daily driver, but I still wanted to document this for later! My roommate has been building an XJ for a bit, and we've been meeting people that have land and off road trails on them, not to mention the places 30 min from the house that are stellar for wheeling. I quickly learned the truck doesn't fit on jeep trails, so there was only one solution!
The $300 93ish XJ
I don't ever name vehicles, but for some reason Ruby sticks with me, as this will be the red(headed) stepchild that always gets beat.

It spent the last year of its life sitting in a barn at a friends house under the presumption of a bad clutch, and he had no desire to work on it (got it in a trade) 
He was looking to clear out space so it went real cheap. 
When I showed up there was a search for keys, and the conclusion that he didn't know where they ended up. I have never drilled a lock cylinder so I wasn't going to do that, but you can get a cylinder and key for the xj for $20 bucks which made it tempting. Mobile locksmith wanted $140 for 2 keys, but then stopped responding to me. Ended up bringing the keys to my roommates XJ and lo and behold the key for his door locks worked in my ignition perfectly. Convenient.
This will be the third vehicle I have purchased knowing mice lived in it, and it makes me question myself sometimes. Oh well. 

Got it on the trailer using the hill to roll it as there was no battery. 

Got it trailered home (obligatory on trailer pic)
The next day I got to cleaning it up a bit. The roof was amusing to clean with the pressure washer, as it had many much algae on it. 

Got the mouse nest out of the glove box, pulled the airbox apart and found a nice possum nest with a dead possum in it so got that out of there. Put a battery in it and it fired up without much drama. Didn't want to idle at first without throttle, but that eventually cleared up, probably needs the ICV cleaned. 
The clutch does function, but seems to sort of "bleed by" slowly. If you are in gear with no brakes applied and have the clutch pedal pressed it will slowly lose hydraulic pressure and engage the clutch.

After cleaning it in the little hidey hole I have it (I alone have 3 cars and a truck at a house that is setup for 4 cars, much less my roommates 2 cars lol) it looked alright, especially considering what it'll be used for.

Turns out to have a handful of aftermarket parts in it, the front steering components have all been replaced with stronger pieces, the rear lift was done properly, slip yoke eliminator in the rear, adjustable upper control arms in the front, good tires, factory skid plates that are actually staggeringly thick, and a few other odds and ends. 
It should prove to be quite fun! 

[SteelBlue]

Calypso Jeep

[YoungCR]

SteelBlue said:

Calypso Jeep 

I'm going to counter with Burgundrot jeep. I'd say that looks like a sweet deal for $300!

[P_Roloff]

XJ's are great rigs! Does it have the 4.0L?

[GunMetalGrey]

P_Roloff said:

XJ's are great rigs! Does it have the 4.0L?

4.0 with a 5 spd

Burgundrot jeep it is! 

Played with the clutch stuff for a bit to see what I could find. I ordered a new master cylinder to see if the seal in that is weak. 
I hope it's not the slave cylinder, as they use a "Tilton" style slave. 

Getting access to that means pulling the trans and transfer case, which doesn't sound like too much fun! 

They also use a plastic clutch hydraulic line that seals to the master with an o-ring, and is held in place with a roll pin through it. A genuinely wild setup.