Diaries of a Daily Driver
-
It's looking good!
-
What's up with that Aspen white head gasket machine in the backdrop?
Haha, I give him shit for it all the time.
It's actually a pretty sweet build, sounds like a Honda lol.
-
Haha, I give him shit for it all the time.
It's actually a pretty sweet build, sounds like a Honda lol.
I like blobeyes the most, and an Aspen one is choice. I just hate how annoying the engine layout is. Need a hose? TAKE APART THE WHOLE INTAKE MANIFOLD.
https://www.instagram.com/_jdesigner_/ http://nevertoolow.tumblr.com/
🥳SOLD BMW E24 633CSI - BMW M30B32 🧪SOLD HCH ES9 - 1.3 LDA
👽BMW E30 325IC - Toyota 1JZ-GTE ⏰ HONDA EF9 CIVIC SI - JDM B18C5
☠️BMW E36 318i - Ford 5.0 FE302 🚴♂️ GT-Labomba - 26x2.75 Freeride
🤹♀️SOLD BMW E36/7 Z3 - BMW M54B25 🧓SOLD BMW E10 2002 - BMW M10M05 -
Center caps on
Really digging the new wheels, and the tires are quiet which is nice.
Next up is some exterior add on's I think!
Fitment turned out very tidy for not having spacers or anything of the sort.
Added some LED interior lights
Added LED reverse lights that are actually bright
And a random scenery shot for fun
-
Hypergrams look nice
-
And a random scenery shot for fun
Where is that? It looks quite dry.
-
Where is that? It looks quite dry.
Quincy, WA
It's right before the western mountains start.
The middle of Washington reminds me of Colorado in terms of soil type
-
Turns out this does snow fairly well, didn't expect it to float on top but it did!
Mountain snow is wild, and deep as hell. -
Turns out this does snow fairly well, didn't expect it to float on top but it did!
Mountain snow is wild, and deep as hell.The mountains are so good
-
Well she's no daily driver, but I still wanted to document this for later! My roommate has been building an XJ for a bit, and we've been meeting people that have land and off road trails on them, not to mention the places 30 min from the house that are stellar for wheeling. I quickly learned the truck doesn't fit on jeep trails, so there was only one solution!
The $300 93ish XJ
I don't ever name vehicles, but for some reason Ruby sticks with me, as this will be the red(headed) stepchild that always gets beat.
It spent the last year of its life sitting in a barn at a friends house under the presumption of a bad clutch, and he had no desire to work on it (got it in a trade)
He was looking to clear out space so it went real cheap.
When I showed up there was a search for keys, and the conclusion that he didn't know where they ended up. I have never drilled a lock cylinder so I wasn't going to do that, but you can get a cylinder and key for the xj for $20 bucks which made it tempting. Mobile locksmith wanted $140 for 2 keys, but then stopped responding to me. Ended up bringing the keys to my roommates XJ and lo and behold the key for his door locks worked in my ignition perfectly. Convenient.
This will be the third vehicle I have purchased knowing mice lived in it, and it makes me question myself sometimes. Oh well.Got it on the trailer using the hill to roll it as there was no battery.
Got it trailered home (obligatory on trailer pic)
The next day I got to cleaning it up a bit. The roof was amusing to clean with the pressure washer, as it had many much algae on it.
Got the mouse nest out of the glove box, pulled the airbox apart and found a nice possum nest with a dead possum in it so got that out of there. Put a battery in it and it fired up without much drama. Didn't want to idle at first without throttle, but that eventually cleared up, probably needs the ICV cleaned.
The clutch does function, but seems to sort of "bleed by" slowly. If you are in gear with no brakes applied and have the clutch pedal pressed it will slowly lose hydraulic pressure and engage the clutch.After cleaning it in the little hidey hole I have it (I alone have 3 cars and a truck at a house that is setup for 4 cars, much less my roommates 2 cars lol) it looked alright, especially considering what it'll be used for.
Turns out to have a handful of aftermarket parts in it, the front steering components have all been replaced with stronger pieces, the rear lift was done properly, slip yoke eliminator in the rear, adjustable upper control arms in the front, good tires, factory skid plates that are actually staggeringly thick, and a few other odds and ends.
It should prove to be quite fun!
-
Calypso Jeep
I'm going to counter with Burgundrot jeep. I'd say that looks like a sweet deal for $300!
-
XJ's are great rigs! Does it have the 4.0L?
4.0 with a 5 spd
Burgundrot jeep it is!
Played with the clutch stuff for a bit to see what I could find. I ordered a new master cylinder to see if the seal in that is weak.
I hope it's not the slave cylinder, as they use a "Tilton" style slave.
Getting access to that means pulling the trans and transfer case, which doesn't sound like too much fun!
They also use a plastic clutch hydraulic line that seals to the master with an o-ring, and is held in place with a roll pin through it. A genuinely wild setup.
-
-
Much stoke
Got the new clutch master cylinder in in about 30 min and didn't even need to bleed it.
Clutch is fully functional now. $30 fix for the win.Kind of makes sense that it was worn out. The cluster (speedo doesn't work) shows about 284k miles, so the clutch has been done once or twice and you replace the hydraulic throw-out bearing when you do the clutch. The master was likely original and that's many times of pressing the clutch!
Now to drive it and find what else is broken / needing repair!
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login