Diaries of a Daily Driver

[GunMetalGrey]

SteelBlue said:

You’re in my spot

Lol, the outside spot?

[GunMetalGrey]

Update: 

Wheel options for these is extremely limited.

[Jdesign]

GunMetalGrey said:

Update: 

Wheel options for these is extremely limited. 

Really? Why is that?

[GunMetalGrey]

Jdesign said:

Really? Why is that?

Peculiar offsets. 18x9.5 rear needs a 62 offset

[Jdesign]

Sheesh.

[GunMetalGrey]

I have done a good job of leaving this thing alone, largely due to the fact that I didn't work for a couple months. But now I'm back at it!

Drivers side light works fine, passenger stops working when you have it setup as normal. 
Plugged passenger light into drivers plug, works great. Plugged it back into the pass. side, doesn't work. 

Tried a footwell module (FRM) reset with ProTools, but that didn't do anything, nor did the reset short fault. 

So I think this means I need a new FRM in the car to make things work properly, and it looks like I should be able to use ProTools to adjust the VIN on a new FRM.
For the time I have just disabled the adaptive headlights (which I like and want to make work) and the bulb checks for the headlights so they stop  yelling at me all the time. 

The tires are getting low on tread, and the standing water on the roads here makes that an unpleasant time. Tires shortly! 
But like, who buys tires for stock wheels?!

[Jdesign]

GunMetalGrey said:

But like, who buys tires for stock wheels?!

This is how it begins. You can't have aftermarket wheels with stock suspension.

[GunMetalGrey]

Jdesign said:

This is how it begins. You can't have aftermarket wheels with stock suspension. 

I am impressed how low these cars are from factory, but I cannot confirm nor deny my current browsings of aftermarket spring options.

Funny note, stock suspension out here in WA lasts a long time, the roads are so good!

[GunMetalGrey]

Incomplete photo, but you'll have that from time to time.
Fresh meats, fresh kicks. 
Old tires were worn out, and I like the look of 18's over 17's on these cars.
Konig Hypergrams and some Federal Evoluzion's. Should prove to be a fun combo. The wheels alone weigh around 5lb less per corner when compared to the stock wheels.
Centercaps were installed after this photo. Note that the front right corner is a bit lower than normal due to a slight driveway slope. 

This certainly isn't my normal style of wheel, but they look pretty good in person.

Slightly blurry sunset picture off of the back of our patio tonight, just because.

[Jdesign]

What's up with that Aspen white head gasket machine in the backdrop?

[patsbimmer1]

It's looking good!

[B C]

Gr8 choice of colour, m8!

[GunMetalGrey]

Jdesign said:

What's up with that Aspen white head gasket machine in the backdrop? 

Haha, I give him shit for it all the time. 

It's actually a pretty sweet build, sounds like a Honda lol.

[Jdesign]

GunMetalGrey said:

Haha, I give him shit for it all the time. 

It's actually a pretty sweet build, sounds like a Honda lol. 

I like blobeyes the most, and an Aspen one is choice. I just hate how annoying the engine layout is. Need a hose? TAKE APART THE WHOLE INTAKE MANIFOLD.

[B C]

[GunMetalGrey]

Center caps on
Really digging the new wheels, and the tires are quiet which is nice.
Next up is some exterior add on's I think!
 

Fitment turned out very tidy for not having spacers or anything of the sort.

Added some LED interior lights

Added LED reverse lights that are actually bright

And a random scenery shot for fun

[KaiserRolls]

Hypergrams look nice

[HipMF]

GunMetalGrey said:

And a random scenery shot for fun

Where is that? It looks quite dry.

[GunMetalGrey]

HipMF said:

Where is that? It looks quite dry.

Quincy, WA 

It's right before the western mountains start. 

The middle of Washington reminds me of Colorado in terms of soil type

[GunMetalGrey]

Turns out this does snow fairly well, didn't expect it to float on top but it did!
Mountain snow is wild, and deep as hell.