EV1 vs EV6 Injectors for OBD1 m50
-
I have been searching and what I have found is Bosch 0280155771 is an ev6 injector rated at 17lb/hr @ 3bar.
According to a calculator here http://www.fuelinjector.citymaker.com/Fuel_Injector_Flow_Rates.html the flow rate at 3.5 bar is 18.36lb/hr. Do you think a .86 lb/hr difference is in the range that the ECU can adapt for? I would think so but have no experience messing with injector sizes. I would guess that it is going to be better than the injectors I have that are nearing 300k miles...
-
Ordered a set of OE refurbished/matched set claiming to be within 2%. We shall see. It was only 65 bucks. It seems to be a not very common injector, used in Ford Contours/Mystique with 2.5l SVT engine from 1998-2000, and Cougars in 1999. No wonder it was hard to find a part number. I'd rather not do a tune now, I already have a Dinan chip and this coupe is mostly a beater. I would like to experiment and see how the gen3 design performs. It would be great to know of a drop in upgrade. People use m50 injectors in m20 engines too so this might be a good option for them too.
-
Installed last night. I reset the computer so it is still adapting, it runs great, starts quicker and seems smooth. I don't know how much is due to these injectors being freshly refurbished vs my old ones that may be original with a zillion miles on them and also sat for at least 5 years recently.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login