M52 or S52 in an E30
-
I know nothing about E30s or their market with non-factory motors in them.
$1000+ for a measly 20whp is not money well spent in my opinion.
PS: Put an N54 in it.
-
I know nothing about E30s or their market with non-factory motors in them.
$1000+ for a measly 20whp is not money well spent in my opinion.
PS: Put an N54 in it.
however, his car will be worth at least $1000 more in the end, if not double that. (if that is an important factor to him)
Dan
-
however, his car will be worth at least $1000 more in the end, if not double that. (if that is an important factor to him)
exactly.Ā
S52 is the way to go especially if a parts car with engine, harness, and trans can be sourced - they usually don't go for more than $3k which is well worth it.Ā
I know nothing about E30s or their market with non-factory motors in them.
$1000+ for a measly 20whp is not money well spent in my opinion.
PS: Put an N54 in it.
$1000+ for 20 whp is not money well spent to you because you're used to turbo cars where 75 hp can be gained with a tuneĀ =P Ā In the world of 200hp NA motors, 20 whp is a lot especially across the entire power band.
2011 E92 M3 6MT ZCP - ESS 625 supercharged
2007 Z4MRĀ
2003 E39 M5
2002 E46 M3
2021 X5 40i -
I vote s5x, or at least an m52 with M power valve covers
-
Makes me wonder how many M52 cars with S52 cams have been sold as S52 cars and how many S52 engines have been sold with M52 cams. Are there any markings on the block?'id thin there would have to be a stamp
Yes and no. Heads I believe are all casted the same (?)
Block should have markings
If not the vin is a give away "WBSxxxx" is ///M and "WBAxxxx" is non ///M iirc
-
Sticker on the back of the head. The same castings for both heads.
Sent from my 831C using Tapatalk
This, my tag came off when I had the head hot tanked
-
This, my tag came off when I had the head hot tanked
So it's a SĀ motor then
-
KaiserRolls said:
This, my tag came off when I had the head hot tanked
So it's a SĀ motor then
Yes, mines an s50
-
"M3 engine" in the title and yet STILL no engine bay pics. People confuse the shit out of me
-
True. Doesn't change the fact every sale ad should include an engine pic. Especially if you mention it in the title.
Sent from my SM-G930R4 using Tapatalk
-
I have never driven a swapped car so I can't comment on that part of it, but I think there is value in "doing it once" and getting the S52 right off the bat as they are only going to get more expensive.Ā No matter what you do with the M52 it will always be a little bit short of the S52 (unless you do an M54 rotating assembly), so if your goal is maximizing performance from an NA 24v, might as well get the S52 now versus wanting one later. If you can find a wrecked M3 for a reasonable price and have the time/space to take it apart, you can keep the S52/zf combo, part out the restĀ and end up with a decent deal on a motor/trans.
-
I was honestly expecting more M52 votes. Extremely valid point about doing it right ONCE, which actually goes both ways. I could do an M52 swap right by refreshing everything and be able to get it together and driving this summer. To do the same for an S52 I may have to save my pennies andĀ shoot for completion next year.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better š
Register Login