Lifted E30 V2
-
awesome update!
i also have a late model tank around. $free
Dan
-
So this finally happened! My radiator hoses are not great, they are spliced together out of two different hoses both top and bottom.
I also don't have power steering yet because the mounting stuff is different, but driving it without power steering is surprisingly okay. So I need to figure out what I want to do there.
I'll also probably order the real radiator hoses, and need to get a late model expansion tank in the car because the current one is sketchy at best!
The clutch is also slightly odd, it was an e46 setup, and I'm not quite sure what's going on.In short, it's got kinks yet, but I got to do fun stuff.
-
I hope the exhaust is staying the way it is
Sent from my SM-G930R4 using Tapatalk
-
This is amazing lol.
I have many reasons to not leave the exhaust as is, but it is hilarious and awesome to watch.
-
This car needs to maintain a stack.
-
Awesome! It needs a flapper on the exhaust!
-
I vote for stack with perforated protector:
https://www.instagram.com/_jdesigner_/ http://nevertoolow.tumblr.com/
🥳SOLD BMW E24 633CSI - BMW M30B32 🧪SOLD HCH ES9 - 1.3 LDA
👽BMW E30 325IC - Toyota 1JZ-GTE ⏰ HONDA EF9 CIVIC SI - JDM B18C5
☠️BMW E36 318i - Ford 5.0 FE302 🚴♂️ GT-Labomba - 26x2.75 Freeride
🤹♀️SOLD BMW E36/7 Z3 - BMW M54B25 🧓SOLD BMW E10 2002 - BMW M10M05 -
I bought a super cheap boost gauge. I haven't done anything with it yet.
I got the alternator functioning, which is nice.
Having to build an engine harness as I go is an odd thing. Just keep piecing stuff together. Tonight I will be getting the temp gauge working.The new blower motor is great! It doesn't sound like death! Though it still only works on high, but the resistor pack (springs) looked fine. May just buy a new anyway because that's likely the problem in some way.
Next on the list is an intercooler, apparently that's the #1 to prevent head damage, not sure how that works but it's a recommendation by everyone. I planned on doing it anyway so no time like the present!
I do also need to figure out where to mount 3 or 4 gauges in the car... but I would like to keep the radio. To the internet I go!
-
I bought a super cheap boost gauge. I haven't done anything with it yet.
I got the alternator functioning, which is nice.
Having to build an engine harness as I go is an odd thing. Just keep piecing stuff together. Tonight I will be getting the temp gauge working.
The new blower motor is great! It doesn't sound like death! Though it still only works on high, but the resistor pack (springs) looked fine. May just buy a new anyway because that's likely the problem in some way.
Next on the list is an intercooler, apparently that's the #1 to prevent head damage, not sure how that works but it's a recommendation by everyone. I planned on doing it anyway so no time like the present!
I do also need to figure out where to mount 3 or 4 gauges in the car... but I would like to keep the radio. To the internet I go!
I have an intercooler for you for cheap. Straight thru style. Which may be odd for routing
-
I do also need to figure out where to mount 3 or 4 gauges in the car... but I would like to keep the radio. To the internet I go!
I have one of these (bought it because I'm lazy, making one would be easy), it's not the perfect location as far as being able to see them all the time, but its a nice place to put them and keep heater vents/euro clocks for instagram/radio/etc. They're more visible than the ash tray replacement ones too.
-
I have one of these (bought it because I'm lazy, making one would be easy), it's not the perfect location as far as being able to see them all the time, but its a nice place to put them and keep heater vents/euro clocks for instagram/radio/etc. They're more visible than the ash tray replacement ones too.
This is right in the alley of what I was thinking. Plenty of room to add switches and buttons as needed (glow plug button, switches for lights)
I may try to make something first, save a bit of money and keep with the build style.I plan on running some sort of warning system for oil pressure (other than the stock light) so the visibility isn't too critical at this point, so I think we may have a winner!
-
Next on the list is an intercooler...
Top-mount.
And you'd better make that gauge thing out of diamond plate.
-
Top-mount.
And you'd better make that gauge thing out of diamond plate.
I still don't want to go top mount.
I already thought about the diamond plate situation, but if it does end up diamond plate it will be painted.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login