FuturisticConcept Art BMW E36 with a V8 on a bottom dollar budget

[Jdesign]

Here are some pictures of the mirrors and over-fenders installed and painted.

I also created some graphics for the doors that I will have to change as they are impossible to see. Gloss black decal over gloss black paint doesn't read well. I also added graphics to the quarters which did show up; gloss over matte.

If you guys have any suggestions on what I could make for "futuristic" quotes or graphics, I am all ears/eyes.

can you see the decal in the image below??!

Also here are some pics of the injectors and the tester I made. Also note the container I was using to spray into and all of the shit and sediment that came out. 

[B C]

Crazy how all that crap came out. I wonder if it would be even worse if you backflowed them

I like the font,

Heres something I found that I like too

Its futuristic to me since the characters are almost a shorthand/advanced and efficient version of standard characters

[Jdesign]

Snap said:

Crazy how all that crap came out. I wonder if it would be even worse if you backflowed them

I like the font,

Heres something I found that I like too

Its futuristic to me since the characters are almost a shorthand/advanced and efficient version of standard characters

Yeah it was a lot more than I expected. I don't think back flowing would make a difference(but that's an assumption). There were filters on the back side (that I replaced) and the spray pattern was perfect afterwards. all the deposits were on the engine side of them.

Do you know the name of that font by chance?

[B C]

Anurati

The quick brown fox jumped over the lazy dog

[Jdesign]

[B C]

ha! the font is only applicable for upper case

the quick brown fox jumps over the lazy font maker

[Jdesign]

THATS FINE. I BET EVERYONE YELLS IN THE FUTURE ANYWAYS.

[HipMF]

Font are dumb.

more random junk from one of my random junk folders

[HipMF]

Plus, I think you should have a revolver mounted to the dash like this guy:

But maybe my vision of the future is different than yours....

[Daggerty]

HipMF said:

Plus, I think you should have a revolver mounted to the dash like this guy:

But maybe my vision of the future is different than yours....

In the future there is only one gear... forward.

[Jdesign]

@HipMF I have been slowly gathering random shit to put in the interior. Any thing is possible, once its found or donated. Currently on the look out for a speak and spell.

[HipMF]

I once read an article that explained how a speak and spell actually works. Amazing what they were able to given the technology available at the time.

Anyway, found this today. I'll just leave it here:

[B C]

Speak and Spell OR a Chrysler voice alert system

http://m.ebay.com/itm/CHRYSLER-VINTAGE-TALKING-VOICE-ALERT-MODULE-FROM-THE-80S-/332363455227?hash=item4d6267dafb%3Ag%3AMgQAAOSwHLNZVXZi&_trkparms=pageci%253Ae0e6500f-8ebe-11e7-97d2-74dbd1805e6b%257Cparentrq%253A3b4f651e15e0aa11e207838efffa59bc%257Ciid%253A1

[Jdesign]

HipMF said:

I once read an article that explained how a speak and spell actually works. Amazing what they were able to given the technology available at the time.

Anyway, found this today. I'll just leave it here:

Khyzyl Saleem is a talented guy.

Snap said:

Speak and Spell OR a Chrysler voice alert system

http://m.ebay.com/itm/CHRYSLER-VINTAGE-TALKING-VOICE-ALERT-MODULE-FROM-THE-80S-/332363455227?hash=item4d6267dafb%3Ag%3AMgQAAOSwHLNZVXZi&_trkparms=pageci%253Ae0e6500f-8ebe-11e7-97d2-74dbd1805e6b%257Cparentrq%253A3b4f651e15e0aa11e207838efffa59bc%257Ciid%253A1

Damn you. now I am looking up information on doing this.

------------------

Anyways, I got a lot done last night. Pretty much have to install the distributor and time the engine and we should be good for round 2. I really want to get out to at least one event this year with this contraption.

Here is a quick comparison of the old vs. new for the injector seals/pintle caps/filters

And here is a comparison of the injectors all cleaned up inside and out.

All new O-rings, pintle caps, and filters. what a beautiful thing.

I will note that I got 5 total replacement injectors and learned quite a bit more than I expected about ford injectors. Turns out they have many variations due to the application. (EX: trucks were different than the cars)  Each of the 5 injectors I got for replacements (all from different sources) were not the same as what was in the car. Here is a chart for the types of injectors that could be installed:

With that, the ones that are in the car are F1ZE-C2A  which are 208cc/min-19.8lb/hr. The closest, best flowing replacement I had was F0TE-C3A which is 208cc/min-20lb/hr. So slight variation but I highly doubt it will matter. It will certainly be much better than just dumping fuel at all times. LOL

Here are some pics of the intake all back together, painted and completely installed with new hoses, new gaskets, and sub harness. AS I mentioned I still need to install the dizzy which takes some knowledge and a blinking light from what I am told. Silly ford. 

[B C]

I love how the manifold turned out. I also spy some Mount Gay Bum in the engine bay.
I don't drink but I lived in Barbados for 6 months and saw bottles of it regularly

[Jdesign]

Snap said:

I love how the manifold turned out. I also spy some Mount Gay Bum in the engine bay.
I don't drink but I lived in Barbados for 6 months and saw bottles of it regularly

Wait you lived in Barbados?!? and yes, you don't have to be a sailor to know that Mount Gay is the best!!

[patsbimmer1]

Snap said:

I love how the manifold turned out. I also spy some Mount Gay Bum in the engine bay.
I don't drink but I lived in Barbados for 6 months and saw bottles of it regularly

Way to just casually drop that bomb on us!  Mission trip?

[B C]

Yep,

1 year in Trinidad & Tobago

6 months in Barbados

5 months in Antigua

4 months in rural Guyana

3 weeks before I came home I nearly caught a bullet with my head. Bullets make quite an interesting sound when they fly that close to your ears.

Had some pretty interesting experiences there for sure

[The Full Banana]

Snap said:

Yep,

1 year in Trinidad & Tobago

6 months in Barbados

5 months in Antigua

4 months in rural Guyana

3 weeks before I came home I nearly caught a bullet with my head. Bullets make quite an interesting sound when they fly that close to your ears.

Had some pretty interesting experiences there for sure

How was the traffick?

[Jdesign]

Installed the distributor and timed the engine last night. Took it for a drive immediately. HOLY SHeeeet. Feels like a completely different car. Smoother RPM range, Smoovvvver idle, all the things more better. Now I can get back to the business of attaching novelty items to the car to make it more "Phuturistc"!

I also installed a NOS vintage(1972 bought by my Dad in 1973) Sun tachometer because V8 and the digital one on the dash is impossible to read.

It fit perfect with slight "modification" to the cluster. 

More Burnout videos to come. Next super important task is to weld the diff and finally install the handbrake.