My name is Earl, and I have a Stainless Steel bolt fetish =)
-
Just to give you guys an idea of exactly how my lips will look.
http://www.stanceworks.com/forums/showthread.php?p=1060311#post1060311
This is Shaun Quills car. He is the one powdercoating my faces. We are both running Breytons. His are 11's in the back though. I need to find some 7.5" or 8" barrels to widen mine sometime this year.
Hit him up if you guys need any powder needs met: https://www.facebook.com/ShaunsPowderCoating?ref=ts&fref=ts
-
^That's me=P lol
I got a little bit done yesterday.
I started by taping off the block. I ended up running out of tape so I could only one side=/
I then laid down some primer:
I then had to wait for that to dry, so I started working on the bay again. I busted out a propane torch, wire brush, and pallet knife.
Passenger side:
Driver side:
I ended up having to quit that for the day because my brush bit the dust:
By this time the primer was dry, so I laid down the paint:
It was supposed to have more of a champagne tint to it, but it definitely looks good=) It looks like liquid mercury. Hopefully Saturday I will get the other side painted, as well as removing the crank bolt to pull the timing cover.
I also snapped a few crappy pictures of my rearend parts finished up:
And a shot of the pistons clean:
More to come Saturday=)
-
No they for me=) On a side note. Just spoke with Shaun. He cleared the wheel yesterday, but it was his first time using this new powder. They ended up coming out like poop. He is now starting over. I offered to pay a little extra becasue I feel bad, but he kindly declined. They should be done tomorrow or this weekend I am hoping.
-
I got a little done on Saturday, but it doesn't look like much.
I started off by painting the other side of the block. Both sides turned out really well.
The color came out brighter and more silver than what I wanted, but it will work well with the rest of the colors.
Most of the rest of the day was spent with a propane torch and wire brush. I still have a lot of seam sealer to get out of little nooks and crannys. I'm really hoping I can get it out soon so that I can weld the seams up, grind them flat, and then smooth out the whole bay. I really want to be done with that so that I can just fit the wheels, and then send the car off for paint.
I'll hopefully be ordering a ton of parts this week so I can slowly cross things off of my list. I also need to replace a wheel bearing in the rear so that I can put the subframe back in.
Last thing I got done was a little cleaning on the steering rack. I ran out of brake cleaner=(
I'm hoping some more exciting updates will come sooner than later.
-
earl it was fun watching you flip out at the gas pump on saturday. hahahaha
oh and this...
-
funniest part was when i was outside and you said "hey john, can you take a picture of me planking?" i had a confused look on my face, but then i realized that it was earl who asked the question.
-
I got another little chunk of work done yesterday. I wanted to smooth out all of the old bracket mounting points. I grabbed a 120 grit flap wheel and went to town.
I then got most of the seam sealer finally removed from the corners. Some of it is still in that very tight corner. I think I'll need to use a pick to get that out.
I then put the subframe bushings in.
I went to put the trailing arm bushings in and ran into a snag. I got the end with the sleeve pressed in with the help of a hammer, but I could not get the other end to come in any farther than pictured=( I didn't happen to have a c clamp handy, so I will be using one today to get them fully seated.
I will be going to the shop today after work, and also on Sunday. I'll post the updates Monday=)
-
nice!
-
excited to see this thing in one piece!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login