what are you using to get the carbon build up off? I.e. using a scotch pad to get it off the face of the cylinders, use a screwdriver/plastic puddy knife as an edge to get it down in the reliefs.
use a plastic putty knife to get in the reliefs, put the scotch pad down, then use the edge of the putty knife to get the pad in the relief and scrub like a mofo. I'm sure using just the putty knife would work too
use some carb cleaner or what i used to clean all my engine parts was diesel. it works just like the chemical used in a parts washer. like brian said use a plastic putty knife of a screwdriver just don't dig really hard and gouge the piston.
I was just looking through old pictures yesterday and found a few that I don't think I ever posted. I cannot wait for the car to have a fresh coat of black=) I should have also cut my bumpstops way back when. It definitely sat too high. Definitely needed spacers too. Oh well=)
You get to daily the e46 though. I have to drive the mk3..........
You make it sound like I actually like heated leather and nice speakers.....
Besides, no car can climb snowbanks like the mk3. And I mean... NO car.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.