My name is Earl, and I have a Stainless Steel bolt fetish =)
-
Is this how you bought it?
-
Minus having a hood on it. lol And it wasn't washed. I'll find a picture=D
First time I saw the car. The hood that was on it in the picture above is the original one. It flew up on the highway from the PO (my friend pictured) not closing it all the way. Hence why it had a brand new windshield too.
He just bought the car a month or two before because it was on craigslist as a parts car. He put in the missing rear diff and changed the brakes. I believe that was about it.
-
I called in sick on Friday to go in and work on the car. I now need it to get warm out so I can paint these parts and reassemble it all.
I started off by slipping with a drill and hitting the trailing arms yet again. Somehow a tap followed.
One of them is dead nuts in the center, the other is slightly off=( I don't believe it'll be much of an issue.
I grabbed a new wire wheel and put it to good use.
Do you think the paint should hold pretty well with that little bit of rust dust left? I can never seem to get it with a wire wheel=/
I also decided to snap a few pictures of the rear brake lines. I am so glad that I decided to do the rear subframe now.
I'm hoping I can find a way to paint some of these items on Wednesday. I also have a few lists of parts that I need to order.
The wheels are in transit, and I will be ordering lips shortly. I also decided on a color for the centers=) I most likely won't make my June deadline, but I have not given up.
TTFN
-
I went out to the shop yesterday, only to leave after an hour so that I didn't freeze to the floor.
I did come home in time to receive a pleasant gift:
Only two came. The other two are somehow in Ghana, Africa 0_o
Then I got to work and split them=)
Hopefully the other two show up within the next week or two.
I also was surprised to see the width of the lips. I initially read that they would be 1" lips. Upon measuring, I found out the lips are 1.5". This is excellent news. Now I'll be putting 3" lips up front; instead of 2.5", and 3.5" lips out back; instead of 3"=D
More updates Saturday.
-
From what I can tell, it is really straight forward=) You bought and OEM gasket right? I hear nothing but bad things about the Victor Reinz gasket.
Oem gasket was used. Tried the victor reinz 2 times and did not last very long at all on the ti.
1976 530i e12
1990 325ix e30
1992 325i e36
1995 740il e38
2001 330xi e46
^More to come
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login