V8 Swapped E30

[KaiserRolls]

CMart said:

Are fluid reservoir levels really that volatile?

Edit - do you have the in cabin brake bias adjuster?

Mines been on my car for 28 years. Hasn't exploded yet

[johnprusinski]

So last night I ran some steel braided lines to a bulkhead for my brakes and clutch line.

[johnprusinski]

Today I finally got my cage for the e30. I'll be prepping the cab and trying to fit everything in hopefully in the next few weeks. 

[KaiserRolls]

At least it's labeled

[emoji854]

[johnprusinski]

Lol I wish, it's going to be a little difficult to fit it.

[DrLeadFoot]

Who made the cage? I'm in for all the details. Leaning this way for my e30.

Sent from my SM-G900V using Tapatalk

[wasnt m3]

DrLeadFoot said:

Who made the cage? I'm in for all the details. Leaning this way for my e30.

Sent from my SM-G900V using Tapatalk

Molitor, I'm leaning towards get your car running and driving first, then worry about the cage.

[straight6pwr]

andyhundley said:

Shots fired!

[DrLeadFoot]

wasnt m3 said:

DrLeadFoot said:

Who made the cage? I'm in for all the details. Leaning this way for my e30.

Sent from my SM-G900V using Tapatalk

Molitor, I'm leaning towards get your car running and driving first, then worry about the cage.

It'll get there. A cage is in the cards. One thing at a time is how I work but not how I think.

Sent from my SM-G900V using Tapatalk

[Doorman]

Lookin good my man!!

[johnprusinski]

I ordered the roll cage from rollcagecomponents.com. it took about 3 months to get to my work, so you can order it now and in three month you will have all the parts.

[johnprusinski]

Well I decided to build the step boxes for the cage and I ended up mounting the main hoop. 

[johnprusinski]

I got a little bit more tacked in over the weekend. 

[B C]

Looking great so far!

[johnprusinski]

After some time, I finally got the majority of the cage in. I messed up on one piece and I cut it too short, but it was bound to happen. I'll just have to get another piece. 

[johnprusinski]

I finally got everything tacked in last night besides the door bars. 

[B C]

Hassle? Fun? Not bad?

[johnprusinski]

It wasn't too bad. Just figuring out where everything goes was not fun.

[johnprusinski]

It's been a while since I've updated this thread. I took a break on the car to focus on family issues, but now I'm back and ready to spend some money. 

The first thing I did was clean the garage and move my car over. I also put it on the ground so I would get a little more motivated. 

Then I bought some coilovers, sway bars, control arms and tie rods. I got the majority if everything done besides the front coils. 

[Jdesign]

Nice! 'Tis the season! Whats that car next to it?