1991 318is M62B44 Build
-
Run zoomies through the hood. Jk.
Hopefully we can both finish our cars and do burnouts
-
It's funny when I picture this car being done I don't picture it at the track (which is my new goal for the car), I picture myself in a parking lot with the throttle down choking on white smoke.
We'll have a BYOT (bring your own tires) party
It's been a bitch so far. I need a lift or a hand to make any real progress, but I cleared my schedule for tonight to see what I can get done. All I have at this point is the exhaust manifolds made and my old E39 exhaust I plan on frankensteining. Driver side down pipe is proving to be a real pain in the ass.
I feeel ya! I've built a few exhaust at my current shop now, and I have gravel for most of my garage floor LOL.
Between that, and having broke my back when I was younger, and still having a couple herniated disc's, life is real hard without a lift! haha.
sk8 or die
-
I think there's three lines off the tank. Fuel send/return and the third is a breather line that runs up to a charcoal canister and then to a purge valve to the intake. The connector on the furthest left of the pic looks pretty similar to the coolant level sensor, I'd imagine it's gas level (?) the middle connector is probably for the fuel pump. Don't quote me, just guessing
-
So the pump wires are on top?
Yeah it's 3 connectors but I'd have to go look at the e30 Tomorrow.
-
Down pipes and gutted cats are in. I need to way to trick the secondary O2 sensors so I don't have a CE light on all the time. I am thinking I can tap into the primary and run a resistor or buy those O2 spacers that trick them into thinking the cats are there and working.
Mach up - Thought it looked pretty cool.
Waiting on my C101 and then I can start the wiring. Still need to tweak and reinforce the remote booster and run all the plumbing.
-
What DNA radiator are you running? Looks to be thicker than an e30/e36 one
-
So the pump wires are on top?
I ended up not getting to my shop this weekend. Any diagrams on r3v or in the bentley?
-
What DNA radiator are you running? Looks to be thicker than an e30/e36 one
It is supposed to be for an E30. I wish it was wider, but I will wait to see what my coolant temps are and change if needed.
I ended up not getting to my shop this weekend. Any diagrams on r3v or in the bentley?
Haven't looked any further into the wiring. I got as much done on the exhaust as I can until my hangers show up. Pretty happy with everything thus far.
-
If it is a TUB engine, they are used for air/fuel I believe. The early models do not use them for anything other than cat monitoring, as Snap said.
-
Not TUB. Thank god.
Showers ftw
-
TU = totally useless.
just set the cams to 'hot' and leave them alone BMW, this isn't risotto.
Dan
-
A lot of my exhaust was just tacked up so I finished as much as I could before running out of argon yesterday. Started the wiring and just picked up some more argon to hopefully finish the full exhaust this weekend.
Bad news is I seem to have a rear main seal leak or a transmission seal leak.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login