The official WHAT ARE YOU DOING TO YOUR BMW thread.

[rampelsauce]

What Im doing to my car... hmm....

From this:

To this:

Im coupe swapping the cab and doing a small tail/euro bumper conversion.  Also M20B23 motor swap.  Also a pedal delete, which then I shall reverse.  

This is what Im planning at least.

[jockhater2]

Once spring/summer hits. I gotta put my motor back in. then finish the stereo I am working on. 2 alternators, 3 batteries, 6 runs of 1/0 ga. 2 12"s on 6500watts RMS. Zed audio 6 channel for the front stage and a Pioneer P99RS HU to control it all.

[wasnt m3]

Have some parts stacking up. If only spring would come around one of these months...

[Rowleym]

Is that how most of you guys do it? Just buy parts all winter and then work on your car come spring? Man it sucks not having a heated shop. I just end up working at the machine shop on my cars... but there is only so much you can do.

[wasnt m3]

Rowleym said:

Is that how most of you guys do it? Just buy parts all winter and then work on your car come spring? Man it sucks not having a heated shop. I just end up working at the machine shop on my cars... but there is only so much you can do.

Planned on doing some work on my e36 this winter, just haven't had much free time. The cold doesn't help much either! Got some goodies for my touring, just waiting to pull it out of my storage once it's nice out. That ones getting a bit of a facelift...

[DrLeadFoot]

I need to get a bigger inner diameter wastegate vacuum hose.

Sent from my SCH-I535 using Tapatalk

[Rowleym]

DrLeadFoot said:

I need to get a bigger inner diameter wastegate vacuum hose.

Sent from my SCH-I535 using Tapatalk

-4 I presume?

[DrLeadFoot]

Rowleym said:

I need to get a bigger inner diameter wastegate vacuum hose.

Sent from my SCH-I535 using Tapatalk

-4 I presume?

I think that's right. I just need 1/4 inch ID instead of the 1/16 that's in there now.

Sent from my SCH-I535 using Tapatalk

[patsbimmer1]

I ordered my summer tires today!  Falken Ziex ze912!

[mkoepp]

Replace my alternator bushings. I could not keep the belt tight. They do look a little worn.

 

[andyhundley]

Too much stuff to do and so little free time!

[Earl]

Went from this

To this today

[jc43089]

Nice work Earl, keep it up.

[I love my E39]

Parked my e39 in the driveway til I get summer tires, In the mean time I will be daily driver the rally wagon.

Sent from my LG-LS970 using Tapatalk

[patsbimmer1]

I replaced my cam sensor and crank vent hose. Now i can come to a full stop without the car stalling!

[ClassE]

Installed new front brake pads, corrected toe-in issue in front, pulled both front coils, re-set ride height and coil preload, and packed car up for tomorrow.

[KaiserRolls]

hopefully can add to my thread tomorrow with the finishing up of some things

[Narcosis]

Got suspension installed, visited the body shop to get some paint touched up after a winter issue, and am going to start upgrading my audio system soon.

[KaiserRolls]

Change oil. Checked coolant crap. Installing hydro with earl, stew, and john

[jc43089]

Installing an F1 aluminum flywheel and Sachs clutch in a late e36 today.  I also got a 75/25 gas bottle for my birthday so I can weld like a boss now.