The official WHAT ARE YOU DOING TO YOUR BMW thread.

[DrLeadFoot]

Rowleym said:

I need to get a bigger inner diameter wastegate vacuum hose.

Sent from my SCH-I535 using Tapatalk

-4 I presume?

I think that's right. I just need 1/4 inch ID instead of the 1/16 that's in there now.

Sent from my SCH-I535 using Tapatalk

[patsbimmer1]

I ordered my summer tires today!  Falken Ziex ze912!

[mkoepp]

Replace my alternator bushings. I could not keep the belt tight. They do look a little worn.

 

[andyhundley]

Too much stuff to do and so little free time!

[Earl]

Went from this

To this today

[jc43089]

Nice work Earl, keep it up.

[I love my E39]

Parked my e39 in the driveway til I get summer tires, In the mean time I will be daily driver the rally wagon.

Sent from my LG-LS970 using Tapatalk

[patsbimmer1]

I replaced my cam sensor and crank vent hose. Now i can come to a full stop without the car stalling!

[ClassE]

Installed new front brake pads, corrected toe-in issue in front, pulled both front coils, re-set ride height and coil preload, and packed car up for tomorrow.

[KaiserRolls]

hopefully can add to my thread tomorrow with the finishing up of some things

[Narcosis]

Got suspension installed, visited the body shop to get some paint touched up after a winter issue, and am going to start upgrading my audio system soon.

[KaiserRolls]

Change oil. Checked coolant crap. Installing hydro with earl, stew, and john

[jc43089]

Installing an F1 aluminum flywheel and Sachs clutch in a late e36 today.  I also got a 75/25 gas bottle for my birthday so I can weld like a boss now.

[Earl]

I will be pressing my hubs into my rear bearings today=) After that I will be sorting a bunch of other tidbits in the rear

[DrLeadFoot]

I'm going bald waiting for the unknown. Then after that I'm waiting some more.

Sent from my SCH-I535 using Tapatalk

[B C]

im converting fuel into clutch dust

[Bassboy3313]

I am finally getting back into working on it after a horrible winter and spending my time moving.

[Earl]

Pressed in my hubs and installed my Adams Rotors yesterday

[B C]

looks so good! Im hoping you replaced all the parkbrake stuff while you were in there.

[Earl]

Snap said:

looks so good! Im hoping you replaced all the parkbrake stuff while you were in there. 

Some butt nugget before me tore absolutely all of it out so I have nothing. I am trying to think of a way to link my handbrake up to a cylinder to have a hydraulic parking brake.