E46 328ci
-
Was the guy from West Bend? I swear Ive seen that caf around. Is he just putting it back to stock to sell it?
The dude that used to have its name is Matt Hayes. I seen it a few times as well. It had a rad-fab sticker on it so I asked tanner.
-
Got the coilovers installed today. Only took around 3and half hours, including a tool run. Whole process went incredibly smooth given that I have not removed any of the suspension components since owning the car. Biggest mishap was probably myself dropping a stock lug down the drain, but since I was installing the spacers I had the extended lugs to run anyway. Drop is pretty mild, but it removes the wheel gap which was my biggest gripe about the car. Have room to go down lower so I'll probably adjust the height next weekend to a little lower, maybe like half an inch? The spacers filled out the wheel perfectly but 45 profile tires with the spacers would be close going too much lower. I am really happy with the ride quality of the FK's, it is a definite upgrade from my old sport suspension. The M3 bumper really helps out the front end appearance. Thoughts on taking off the carbon fiber splitters? I really like them, but I feel they may be out of place on my car. I can't thank Ben enough for helping me out today.
Took the E30 for a good rip to Sears, I love this car. The M52 is a great engine in that chassis.
Also,
Maybe.
-
I only just realized this was Ben with a new username
The M52 is the 24v that makes the most sense to me and has always been my intended swap if I ever went 24v. Glad its working out well thus far
I am actually a friend of Ben's, we did the work at his shop. He is still GunMetalGrey
-
Lol SteelBlue and GunMetalGrey. You boys sure do like your metal colors.
I can't believe you had to make a parts run from Ben's shop. He has like every tool known to man in there.
The car looks great. The front looks awesome, but I think you need side skirts of some sort now. The rest of the car isn't as aggressive as the front. The Schnitzers look good.
-
Lol SteelBlue and GunMetalGrey. You boys sure do like your metal colors.
I can't believe you had to make a parts run from Ben's shop. He has like every tool known to man in there.
The car looks great. The front looks awesome, but I think you need side skirts of some sort now. The rest of the car isn't as aggressive as the front. The Schnitzers look good.
someone said:
The rest of the car isn't as aggressive as the front.
This was my feeling regarding the front. I think I might take the splitters off and see how it looks.
I was also surprised we had to make a parts run. However, it was a conversion extension that he had one of, but it was broken.
-
I can't believe you had to make a parts run from Ben's shop. He has like every tool known to man in there.
That is nowhere near true! There is always room for more!
Looks good, Those AC's look mint on there.
Glad we got it knocked out so smoothly! -
Haven't really done much with the car besides drive it. Was able to car pool with a co worker who has a newer car that doesn't mind driving everyday as long I throw a little gas money, which is nice. Went to do the passenger front wheel bearing this weekend, needed a 46mm socket, found out no one sells them locally and had to buy it in a set at Harbor Freight. Was 1 inch drive impact socket set, so I needed and adapter set, plus a breaker bar (that was 3/4 inch. $124 later I was ready to go, until I found out that the socket side wall was too thick to fit in the hub...So I over nighted one on amazon for $10. Just returned all the stuff after I was done. The race gave me a little fight, but relatively easy process other wise.
Cleaned the wiper relay which fixed my intermittent wiper issue.
Did a lock rebuild kind of correct, it locks but I must have put one of the pieces in backwards as the key doesn't lock it still. I'll figure it out later.
Was gonna do the oil as I am 3,000 miles over the suggested mileage, got too lazy, I'll do it later.
-
Was at my buddy's house last night and he had these 3 piece reps still after he sold the car that they were on. Figured why not throw them on and see what they look like on the car. I wish I hadn't sold my LM reps. I'm not a fan of the style of these wheels and the amount of stretch are on these, but the lips look really good, would need to come down lower to fit right.
-
Would need camber to fit right too haha. 17's are usually small on an e46 unless you're crazy super low (even then they look a hair small). 18's seem like the way to go
Yeah, would definitely need a roll and pull to fit the rears. 10.5" is just a little wide. The LM reps were 9.5" and they fit perfectly.
-
Were those wheels on a s52 swapped compact by chance?
-
Were those wheels on a s52 swapped compact by chance?
Yes they were.
-
The hellaflushness gave it away
-
The hellaflushness gave it away
I'm sponsored by StanceNation, bro.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login