ClassE 1989 325IS Build Thread
-
Repost from the E30 tech thread - thoughts?
To those who have installed solid trans mounts in an E30. I just finished installing my solid engine mounts and trans mounts, and took the car for a quick test drive (1989 325IS, fairly stock M20). Engine/trans vibrations are fine, throttle response is great.... but under load between 3k-5k I feel a "rumble" from the driveline. I'm not sure if it's a "trans vibrating tunnel/chassis" rumble or a "Might lose a driveshaft" rumble. Any experience with a similar noise/vibration from others? I'm well aware I'll be feeling more vibrations and such through the car, but this one immediately had me going "uh-oh".
Also - are the OEM trans mounts a "straight through" design? When I removed my original mounts, one mount had the studs a good 1/2" or more "off alignment" from one another. Not sure if the new trans mounts "corrected" this misalignment and is causing a vibration - or if that's totally acceptable.
-
Stupid question, but can the mounts be installed upside down or are the left and right different?
Maybe the OEM ones, the Condor ones are identical.
-
Alright, I'm calling the vibration "not okay" and blaming it on a driveline. I'm gonna pull the driveshaft to get balanced, and get a new guibo and CSB. Having never done either, any words of wisdom.
Still debating on doing before scooters or not. I can likely have parts on Wednesday, but that's cutting it alittle close to reassemble (in case I run into any issues).
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login




