ClassE 1989 325IS Build Thread
-
Yeah, I don't think it'll be a big deal. I'm more upset I'll have zero wheel time to troubleshoot any issues before hoping on a highway tomorrow AM. We're having both sets of parents over tomorrow night for a birthday dinner for my mom - so can't get wrenching until after that...
If it wasn't for the last minute - nothing would ever get done.
-
162 miles on the car Saturday.... Drive quite well.
Steering rack has some play in it, just enough to vibrate the steering wheel and be annoying, so putting that on my short list of stuff to do before Scooters.
Current list to accomplish before Scooters:
-Paint/Replace exterior trim pieces (vents under windshield, etc...)
-Get windshield replaced
- Install stereo system (replace deck, get sub/amp in, etc...)
-Tear apart engine bay and paint/coat/remove/replace so it's more gooder looking.
Also promised my wife I'd get re-started on finishing our basement.... So gonna be some long nights and weekends this month again!
-
If the steering rack has slop in it and it is not related to tie-rods, loose mounting hardware, loose steering shaft collar nut (airbag cars only) or worn steering coupler, then you could try adjusting the gear lash in the rack by tightening the 22mm screw on the bottom of the steering shaft housing. Something to try before going for a whole new rack
-
If the steering rack has slop in it and it is not related to tie-rods, loose mounting hardware, loose steering shaft collar nut (airbag cars only) or worn steering coupler, then you could try adjusting the gear lash in the rack by tightening the 22mm screw on the bottom of the steering shaft housing. Something to try before going for a whole new rack
Or get z3 rack
-
If the steering rack has slop in it and it is not related to tie-rods, loose mounting hardware, loose steering shaft collar nut (airbag cars only) or worn steering coupler, then you could try adjusting the gear lash in the rack by tightening the 22mm screw on the bottom of the steering shaft housing. Something to try before going for a whole new rack
Excellent - I'll give it a try!
-
Sure - looking to make a solid version?
Yup! I also like to have cad files on all the parts I can!
We are putting an extra m50 head under the rover arm tonight and will be measuring the intake and exhaust flanges, and possibly the combustion chamber as well.
I don't always build things just to save money or whatever, I like the experience of building it, and I often learn much more about the part by doing so.
Thanks for supporting my enthusiasm
sk8 or die
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login