'88 E30

[YoungCR]

I've always heard that GKN from Worldpac (available through Blunt) is the best for replacements too.

[KaiserRolls]

As dumb as it may sound, I might just snag a bunch off of parts cars & have spares. If these lasted 240k, I wouldn't have any reservations running other ones. They are easy enough to replace if necessary.

[Earl]

Easy enough to regrease and reboot too=)

[straight6pwr]

thanks for the carnage pics. i'm thinking a necklace of honor made from the cv bearings would be good.

[Bassboy3313]

They may have lasted 240k miles of normal driving, but not 240k miles of crazy launches from a higher torque engine swap. [emoji14]

Sent from my SM-G930R4 using Tapatalk

[GunMetalGrey]

KaiserRolls said:

Step9:

Yes my exhaust was safety wired up

Step9.5:

Don't judge me

Whatchu know about safety wiring exhaust?!
That was an amusing evening lol

[patsbimmer1]

If GKN is sold through WorldPac then you should be able to order them from Advance Auto or Carquest.  Advance acquired WorldPac with their acquisition of Carquest.  That could save you some shipping.

[Jdesign]

I second the WorldPac Axles. I have a set in my car and they seem high quality. They were cheaper than getting boot kits for both axles as well LOL.

[KaiserRolls]

Just gonna snag some used OE ones from Nick. Perhaps regrease and reboot them.

[KaiserRolls]

Lowered the car off jack stands today. Then folded the mirrors in. It's stored. I've given up on finding 4x100 wheels in 15" for slapping some spare tires on for storing. I'll probably just end up putting it back on jackstands. Brooke's Miata is taking over the garage this winter for the turbo stuff. We almost have the motor out of it. I would rather own a broken e30 than a running Miata. I figured out the reason they last 250k miles with minimal maintenance is because when you do have to work on them there is zero, fuggin, room and the thing was put together so ass backwards you'd need 3.7 arms, 32 fingers and 120 vacuum fittings to do anything to it (it's not that bad, i just enjoying ranting)

In all seriousness if I can get the axles taken care of, possible source a 3.25 LSD, get an actual water temp gauge, change the t stat/waterpump, add power steering this winter I'll be happy.

If I end up liking miatas after this winter , ban the shit out of me.

[KaiserRolls]

forgot to post the Road America video here. for some i reason i let off before the timing light

[KaiserRolls]

Just picked up some axles from Nick! Will be ordering crap to reboot and regrease them.

[KaiserRolls]

Haven't touched the axles as the Miata is suffocating the garage right now. But I slapped on a wheel I picked up from Dan. I really like the smaller size and the way it sits a tad closer to the driver

Size comparison to stock for those interested (no idea what mm the sparco wheel is)

Might eventually get a center horn button, even though I don't have a horn

What a comprehensive review

[straight6pwr]

looks purposeful next to that hydro lever!

also the yellow stripe compliments the blue ratchet strap nicely.

[KaiserRolls]

So haven't done anything to the car, as the Miata is still priority. But I finally hung up some lights. Already have the 2 LED bulbs in the normal sockets-but they're in non helpful spots.

Went to menards. Spent $10 per fixture thing. Bought some 6500K LED bulbs for like $8 and hung them. For under $50 I can now see what I'm ruining in the garage!

Also put it on jackstands again, hooray

[KaiserRolls]

Also, it's t shirt and shorts weather!!

[YoungCR]

Damn those led bulbs are cheap! Looks good.

[patsbimmer1]

I didn't know you could buy fixtures and bulbs that cheap!  I'd love to upgrade my halogen's to LED's at some point in the garage.

[Jdesign]

Let there be light! I added lights to my work benches in my shop about 6 months ago, I dont know why I waited 5 years to do it, but it made a world of difference. Looks great, I am also impressed that you hired someone to stare deeply into the casting of the miata engine to search for extra horsepowers!

[KaiserRolls]

Updates-ish

Car still remains a pile of parts

Miata motor is hopefully going back in the car this week

Haven't fixed my axles, haven't reinstalled power steering, haven't installed my seats

Just been Miata stuff lately, please send help

Ben came over last weekend. We pulled the head

I will be taking it to a shop in MN most likely. Then I will probably be ordering ARPs and a cutring headgasket because why not