'88 E30
-
Everything's out of the car right now, so the bitch clip won't be that big of a bitch haha
-
The engine and trans will come out before the shifter ever gets loose again
-
Okay, anyways. I'm just saying it's an epic setup and I'm never gonna miss a gear again. Amazing to drive with.
Sent from my iPhone using Tapatalk
I believe it! I just want a decent shifter feel. The car has other areas that need attention first lol. Like putting it back together
-
I like mine a lot. But I've never shifted a floor shifter.
Sent from my SM-G900V using Tapatalk
    @DrLeadFoot
-
I just ended up going with the condor ssk. Gonna toss a zhp knob on it and call it fine for now. Maybe pick up the dssr for it at a later date.
Or buy it the next time the engine comes out. Lol.
-
Never used a z3 shifter. Never used a zhp knob. But I have used sloppy shifter and I know I hate them.
-
^ I second this. I tried it on a g260 and it was real notchy and hard to get into gears at higher rpm. I have a zf now tih the m3 rod and it is a buttery smooth shift.
-
With the ZF I have the m3 rod in it now. If I hate the z3 I can swap it out. Or sell it.
-
Stuff
-
It ended up being Sachs stuff (from gripforce)
Would of had the engine in today. But condor is taking their sweet time shipping parts. Currently awaiting the shift rebuild kit.
Trans fluid was changed, everything is on and torqued.
Interesting thing about the pilot bearing. The one we removed we used a home made puller out of some nuts and bolts. It came out eventually. The kit from gripforce sent two clutch alignment tools and two pilot bearings. The one on the left is what I removed, the one on the right is the one they sent that was smaller. (They also sent a correctly sized one) without paying attention we put in the incorrect pilot bearing (smaller one in the pic) and the puller wouldn't work on it because it was a smaller size. So I busted out two slices of bread, (BMW is super picky about what kind of bread you use in their engine blocks) Had to use split top wheat and remove the crust, Sara Lee is all I'll use for bearing removal, wonder bread is all BS) shoved it into the pilot hole and it popped out, cleaned out the cavity and put in the correct pilot.
-
I'm guessing it's just a general kit that they just throw in the two bearings and allignment tools so they don't have to guess which month/year used whatever size.
That's cool that the kit was Sachs parts, I'll probably buy that next time I need to do a clutch.
-
The pressure plate was. I think the clutch was LUK (?)
Flywheel was fidanza/fx racing or something or other. All I know is that it's not a 25lb dual mass boat anchor. This one was like 14/15lbs and a chromoly single mass
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login