'88 E30
-
Trans is clean enough for me.
I do give earl props for the tooth brush. I used a wire brush for 14 seconds and gave up. Sprayed it with gunk and pressure washed it instead.
Then rolled the car outside, gunked it & pressure washed it. Rolled it inside, cleaned some more and then temporarily hit it with flat black (I believe the PO had satin/semi gloss) I may try to go back to that. Not sure
It's no gunmetalgray bay, but I'm okay with it
-
Still have yet to order parts
-
What was your decision on the charcoal canister?
I got rid of mine last year including the hardline that ran to the back, had it wrong the tank pressurized which was funny. I am now venting to atmosphere and using a garden tractor style fuel filter to keep things clean. -
I'm just going to vent to atmosphere and toss a filter on the line
-
Yep, that's how I ended up.
-
Going to hold myself to actually ordering parts tonight so I can get this thing back together
-
Why isn't this done yet? Ay ay ay!!
-
Are you gonna make it to the E30 Picnic?
-
Is that a Garagistic bar?
-
Is that a Garagistic bar?
Ireland engineering
-
Why isn't this done yet? Ay ay ay!!
Because I suck at buying things
Are you gonna make it to the E30 Picnic?
Nope. Going to automotion with some friends
-
Parts should be getting here mid to late next week.
I'll be able to get the s50 sealed up and ready to go.
Still have to order a radiator/hoses, engine mounts, Trans mounts, O2 sensor and some random other crap for the car.
Right now the focus is on getting the motor sealed up & ready
-
This stuff was a pain in the ass
After the silicone spray to seal&make color last
Exhaust Hardware/gaskets came today as well. New studs to mount these and then the rest of the parts show up Thursday/Friday hopefully
-
-
Does header wrap still cause manifolds to corrode and crack?
Under the "Fair Oxidation Treaty of 2013" wraps and coatings applied to tubular internal combustion engine components are now exempt from defects caused by corrosion.
-
Did you get new lock nutz?
New hardware yes
-
Does header wrap still cause manifolds to corrode and crack?
Never had it happen to Any other stuff I've had wrapped. Even if it does. These are raceland headers that barely fit correctly. They don't look very nice either.
Earl you worry too much
-
The Ebay/Raceland Headers sound much better after being wrapped. The ones I did look exactly like yours, I hate that you have to wrap the three tubes as one...
Looks Good! -
The Ebay/Raceland Headers sound much better after being wrapped. The ones I did look exactly like yours, I hate that you have to wrap the three tubes as one...
Looks Good!
Thanks man
I wrapped 2 from collector to manifold. Then started at end of exhaust, worked my way back to the manifold side going from 3-2-1 tubes.
It is annoying that 3 have to be wrapped but oh well
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login