Euro 528i back from the dead!
-
Why does it look like there are two locks on the door? Keep up the good work Chris.
Sorry I didn't see this before Earl! The second key hole is for the Euro Alarm System. I hope to get it working down the road. For those of you that have seen Chuck's E30 touring he has the same thing.
-
Finally getting around to my update from Saturday. So to make sure I had the core support lined up in the right spot I mocked up the front end by attaching the fenders to the body and then attaching the core support to the fenders.
I had a little bit more cutting to do and turns out I trimmed out too much on the drivers side. Since none of this is structural and the only purpose of the core support is to hold the radiator in place along with the headlights, strength is not needed. Done the road this body work will be taken care of properly but for now its minimal effort where needed to get this on the road.
Driver's Side
Passenger Side
Passenger side Seam between the frame and core support matching up perfectly
This is with the hood mocked up. She looks like a car again!
-
What are your plans for the M30 in the euro?
Get it running! Down the road I definantly wanna do meqasquirt seeing all the cool things you can do with it. Idk otherwise as to engine mods. This is my first "performance" car and having never done any enigne work except the timing belt on the m20, not really sure where to start. Figure I'll drive it unitl it gets boring then figure out ways to go faster.
Once I get this thing into a garage work will start!
-
Today was a good day as I pulled the euro out of storage!
Here is where she has been sitting since July. Glad it was a nice, warm sunny day today as I spent about 1.5 hours loading it on the trailer by myself (no rear suspension makes it a lot of fun
)Hauled up to the new shop in Port Washington, even got to unload it all inside
Cleaned off the snow and now its time to start wrenching!
List of to do's to get this driving:
- Reseal motor (if needed, hasn't run in almost 7 years not sure on condition)
- Upgrade to Motronic 1.3 (in preparation for megasquirt down the road)
- Install new clutch
- Put in complete drivetrain/exhaust
- Probably will install new suspension components
- Put interior back in
- Buy/Install euro headlights
-
Today was a good day as I pulled the euro out of storage!
Here is where she has been sitting since July. Glad it was a nice, warm sunny day today as I spent about 1.5 hours loading it on the trailer by myself (no rear suspension makes it a lot of fun
)Hauled up to the new shop in Port Washington, even got to unload it all inside
Cleaned off the snow and now its time to start wrenching!
List of to do's to get this driving:
- Reseal motor (if needed, hasn't run in almost 7 years not sure on condition)
- Upgrade to Motronic 1.3 (in preparation for megasquirt down the road)
- Install new clutch
- Put in complete drivetrain/exhaust
- Probably will install new suspension components
- Put interior back in
- Buy/Install euro headlights
GOOD MAN
-
Next time you guys are wrenching hard up there let me know! I'll bring the beer!
@DrLeadFoot
-
Next time you guys are wrenching hard up there let me know! I'll bring the beer!
Next Sunday is moving day again but after that it'll be wrench day!
Sent from my iPhone using Tapatalk
-
Chris, the shop looks damn nice and spacious too! Now time to get some work done on that puppy!
-
-
Looks good Chris. I wish I had a shop like that.
I'm gonna out grow this pretty quick though! The spot to the right of the euro is for the other car and that's all I got (basically a two car garage). I'll have some storage space on the big racks but still I have a lot of parts and I'm planning on getting more
Plan is to have my garage emptied out next weekend and get all set up and then I'll have you guys over 
-
Looks good Chris. I wish I had a shop like that.
I'm gonna out grow this pretty quick though! The spot to the right of the euro is for the other car and that's all I got (basically a two car garage). I'll have some storage space on the big racks but still I have a lot of parts and I'm planning on getting more
Plan is to have my garage emptied out next weekend and get all set up and then I'll have you guys over Holding you to it!
-
-
Count me in too!
-
Where does one find euro e28 headlights I really want them on my e28
1984 BMW 528e - SETA and manual swapped! M50 to come!!!
1988 BMW 528e - Need parts?
1991 Chevy C1500 (mighty 350 with TBI and Wisconsin weight reduction package)
1996 Mazda Miata (SOLD!!!)
1996 BMW 325i (Donor car)
1998 Chevrolet Corvette (BEAST)
2001 Jeep Grand Cherokee (BROKEN)
-
Get a friend in europe to send you euro parts=)
Pen Pal?
@DrLeadFoot
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login