Chapter GMW | E30 LS1 (starting on post #1427)
-
A window down, music up day in the Black Pearl lead to the front left speaker blowing. I'd amassed parts to ad 12awg speaker wire and ditch the amalgamation of smaller wire and crimp connectors.
Crimped and soldered the connectors.
After the Alpine Type S 5.25 speakers were installed and all was wired back up I "tuned" the amps best I could. The reggae jams are alive once again!
@DrLeadFoot
-
Hallway Pat got a little clip:
@DrLeadFoot
-
-
-
Welcome to the Broke An Axle club!
-
Welcome to the Broke An Axle club!
It’s a shitty club don’t join
-
Finally got the brakes sorted out!
Also installed this 4/0 ground cable I made.
Now on to driving it as much as possible prior to the snow!
@DrLeadFoot
-
Did you get the new axle in?
-
Did you get the new axle in?
I did! Forgot about posting that. Milo approved of the work.
@DrLeadFoot
-
You got another CATuned Axle?
I was just reading someone on R3V complaining that they don't have them anymore and the guy had his break. -
What did you find with the brakes?
-
SO many questions. WE NEED ANSWERS!
Is that your touring?
Is that the last CAtuned axle on this earth?
What was the brake solution?
Where are the burnout videos?!?!??!?!?
https://www.instagram.com/_jdesigner_/ http://nevertoolow.tumblr.com/
🥳SOLD BMW E24 633CSI - BMW M30B32 🧪SOLD HCH ES9 - 1.3 LDA
👽BMW E30 325IC - Toyota 1JZ-GTE ⏰ HONDA EF9 CIVIC SI - JDM B18C5
☠️BMW E36 318i - Ford 5.0 FE302 🚴♂️ GT-Labomba - 26x2.75 Freeride
🤹♀️SOLD BMW E36/7 Z3 - BMW M54B25 🧓SOLD BMW E10 2002 - BMW M10M05 -
Is that your touring?
Can confirm that it is his touring.
Can also confirm that it looks damn good!
-
Looks slow. Needs more moar.
-
Guys!!! Real Estate has been crazy leading to passing out after work/family time and not checking in here.
I just sent an email to CATuned and asked them for axels. They showed up relatively quickly. I think I stretched my driver side diff flange bolts due to a bunch of grease in the new axle. Only got one to click at 74 ft/lbs. Wiped the grease off the passenger side once I pushed the bolts through the axle and all torqued perfectly. I got 2 Catuned axles for the record.
For the brakes I took out the bias valve and popped in a (I think) 88 rabbit master cylinder. Couldn't get the pedal to feel right. Looked closer to find out that the MC was leaking out the back/firewall side. SECOND VW MC that did this to me. Popped in the stock e30 one and pedal felt great. I have another 21MM VW MC that I'll try but if that doesn't work I'll go aftermarket.
That's my touring! I have a huge amount of pics and details on that one. I was blowing Hallway Pat up for parts for about 3 months. Ughhh.
@DrLeadFoot
-
Lovely. Wheres the thread on that gem?
https://www.instagram.com/_jdesigner_/ http://nevertoolow.tumblr.com/
🥳SOLD BMW E24 633CSI - BMW M30B32 🧪SOLD HCH ES9 - 1.3 LDA
👽BMW E30 325IC - Toyota 1JZ-GTE ⏰ HONDA EF9 CIVIC SI - JDM B18C5
☠️BMW E36 318i - Ford 5.0 FE302 🚴♂️ GT-Labomba - 26x2.75 Freeride
🤹♀️SOLD BMW E36/7 Z3 - BMW M54B25 🧓SOLD BMW E10 2002 - BMW M10M05 -
Lovely. Wheres the thread on that gem?
Working on it. Close to getting it done but mainly waiting on specialized plates to come and then it will be thread-worthy!
E30: Recieved Gargastic diff reinforcement, 2nd diff mount and rear trailing arm reinforcements. The off season fun begins!
@DrLeadFoot
-
Subframe out!!
Reinforcements, wheel bearings, new brake lines and some painting are on the docket.
@DrLeadFoot
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login