E30 M50 tear down kinda thing
-
any updates yet??
+0.21
-
Saturday morning the motor looked like this
Spent a total of 12 hours yesterday with a lot of help from Jeff, Earl, John, and a couple of the Lower Standards guys, the motor is in! The harness is on and once I get some new clamps for the fuel lines and put the drive belt on, it should be ready to start!
-
Question- how should I effectively take my radiator core support off? Hack it off? Mine is kind of bent, so I at least have to build the bottom part custom. Hopefully my front end comes together and lines up...
I cut the middle section out first, leaving only the 4 corners. Then from there it's just drilling out tack welds. My lower part was so rusted that I couldn't even find the tack welds, so I just used an impact chisel on the seams. The tops where the fenders sit on was easy, but the lower parts were kind of a pain. I pretty much hacked the bottom ones off. Because drift car.
When you pick up those motor mount arms you're welcome to swing by and check it out.
-
The m50 runs, but it's leaking oil from the front of the head
keep me in the napa know how of how it plays out, the pic was interesting
-
So
That
Means
Rage
Drifting
All
Saturday
Right
?
I could hear that a million times, and I will never, ever, get sick of hearing it.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login