E21 project thread
-
Looks like a ball of yarn in that first wiring pic. Should help to keep the bay clean!
-
Did some more work today on the beem. I ended up cutting the grooves in the injectors for the clips to hold them to the rail.
Fitted them in the head and found out the hard way that the FPR hit the head, not allowing the fuel rail to sit correctly. So, off came the FPR from the stock e30 318i fuel rail. I will be welding the hole shut on the rail and redrilling it on top of the rail in the same location as it was. Then, welding an injector boss (since the FPR has the same diameter o-ring as the injector) and the FPR mount in the new spot.
After cutting the FPR mount off I fitted it to the head with the injectors and seems like it will be perfect. Until I put the intake manifold back on.
The hose nipple that I was using for the feed to IAC interferes with the fuel rail, so off it came too. I jb welded it closed and will just need to smoothen it out inside the tb which isnt a big deal.
So things are back on track once I get that fuel rail and FPR stuff welded and clean up throttle body. She's getting there!
-
I thrive to be different and do things in a "think outside the box" manner. Plus, I like the intake manifold I have vs the ugly stock e30 318i one.
-
I love when I see a notification for this thread being updated.
When this is done, you will be the resident m10 turbo efi expert.
-
As it should .... 8v > 12v > 24v .... do the math!!!
-
So you are sliding into the tent tonight and firing this up?!
@DrLeadFoot
-
I think once he gets a TPS, and gets the fuel rail welded up, its just a matter of making a fuel rail mount bracket, modding some of the charge piping, and wiring up the sensors.
I THINK HE TOLD ME HE WOULD HAVE IT DONE NEXT WEEKEND
Im pretty sure it bugs the crap out of him when I prod him like this , lol.
-
You both are bastards!!!
Sent from my XT901 using Tapatalk
-
Well more progress this weekend. Drilled a new hole in the top of the fuel rail and welded up the FPR mount and old hole. Turned out rather nice.
Mounted it all back on the engine and it fits very purdy.
Started figuring out the mounting location for the fuel rail and decided to bend up a bracket to go from the stock fuel rail mounts to the manifold stud.
Then I also started running the megasquirt harness and wiring through the firewall and into the engine bay. Boy this is going to be some tedious wiring work!!
-
If you are referring to the white wires coming off the injectors, no it is not lamp cord, lmfao!!! They are injector harnesses like these here.
-
-
Oh I will totally take those! (no no really)
-
Ok good deal, I just thought it looked funny. Also, this thing is going to be awesome when done, keep up the good work.
Thanks man!
-
Went ahead and mounted the fuel rail along with the intake manifold. Snap also came over to help and got a big chunk of the wiring done. Thanks again! Tomorrow I should have pretty much all the wiring done with the exception of a few things like IAT sensor since that hasn't been mounted yet.
SwCLen!~~_35.JPG)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login