Ummm.... So I took a chance. ***Now with Fire Content***
-
gives a new meaning to 'it fired right up'
glad you and the shop are ok!
Dan
-
SUCCESS!!!
The old girl is idling on her own! Still have some adjustments to do... there was a small stone lodged where the mixture screw is, and once I got it out, the screw is too tight for my makeshift extended 3mm Allen wrench to turn.
I threw some penetrating oil on it to help loosen it up in the meantime while I go purchase a longer wrench.
The O2 sensor was reading about .72 volts when warmed up. I’m confident once the mixture is leaned out she’ll run like a champ!
Best part, no fire!!!
Time for a Busch Latte...
-Tim
59BD0CA0-1FF9-4871-83F2-E3648E170001.mp4
Attachments:
-
SHE’S ON THE ROAD AGAIN!!
Well, it’s been since 1998, but the old girl is back on the road under her own power.
Amazingly, she drives better than I thought! Goes down the road straight, and most things seem to be working as they should. It’s easy to tell the suspension bushings, and tie rod ends are cooked.
20 miles so far, and looking forward to many more.
-Tim
-
SUCCESS!!!
The old girl is idling on her own! Still have some adjustments to do... there was a small stone lodged where the mixture screw is, and once I got it out, the screw is too tight for my makeshift extended 3mm Allen wrench to turn.
I threw some penetrating oil on it to help loosen it up in the meantime while I go purchase a longer wrench.
The O2 sensor was reading about .72 volts when warmed up. I’m confident once the mixture is leaned out she’ll run like a champ!
Best part, no fire!!!
Time for a Busch Latte...
-Tim
And now his wife gave him an early birthday present for the garage.....can you guess what it was??......a fire extinguisher!!
-
Sounds healthy!
Great rescue! What do you think you will do with it?
Thanks Brian!
I’m gonna take my time with this one, try to do most the work myself, and keep it as original as possible.
I’ll probably start working on the interior next, freshen up the suspension, and tackle the little things for now. I’ll start saving my pennies since I dumped my savings into the S52 swap for the ‘86, lol.
-
Not much new to update on the e21 project... put several hundred miles on her over the summer with no issues while I focused on other projects.
Interior bits & pieces are on the agenda while the cars are sleeping for the winter.
Scored a decent set of tan e30 sport seats since I can’t find any e21 replacements. I’ve heard they fit nice, but will need work to fit the uneven floor of the old girl. I’d appreciate any insight from any local experts!
Here’s to a good winter, looking forward to the next driving season! Keep ‘er outta the ditch!!
-Tim
-
The approach I took was cutting out the old seat perch risers from the e21 and welding in cross bars that sit a lot lower. The problem with using the e21 seat perches is the e30 seats will sit way too high. Making new cross supports lower in the chassis is the only way to go.
-
Took a staycation since both of our trips to Canada had to be cancelled.... had some time to rip out the interior, installed new carpet and the seats. Had to fab up some brackets to account for the uneven floor of the E21.
Not perfect, but much better! Lots of work left to do...
-Tim
Great job bringing this one back to life!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login