Non-BMW Stuff on a BMW Forum
-
Thanks for your help on the keyless entry. Made install so much easier and it worked! Super gratifying to have something as simple as remote locks.
On to another thing. Anyone install a performance chip in their e30? Obviously they add some power, but is it significant enough to make it worth it? Looking for some honest feedback on them.
-
Re chips: Mark D (D'silva) and SSSquid have good reps of late. Both have multiple options based on octane and injector size
http://www3.sympatico.ca/mdsylva/
Earlier the options were mainly the Conforti (JC) now sold by Turner and Dinan both of which needed higher octane but used the stock injectors. The rep on the Conforti was some impact along the entire rev range while Dinan was just at top end. Both bump the red line up. I've got an old Conforti on the track car. Used it when it when the 325i was just a DE car and started using it again last year since it was class legal. I can feel it in the midrange on corner exit which is where I wanted a little help.
When megasquirt came out the focus on chips decreased but the SSSquid tunes have lead to new interest.
Is it "worth it"? You've got an e30, short of FI or an engine swap the car is pretty much a low HP brick. A chip will tweak it a little bit but you'll still get dusted by minivans.
-
Its both a slippery slope and an all-or-nothing endeavor.
If you get a cam then you need a cam gear to keep timing dialed in. Then you should really get stiffer valve springs that support higher revs. If you get a big enough cam you should get some headwork done. If you get headwork done you would be smart to get megasquirt or some sort of way to keep the fuel mixtures safe and optimized, etc etc.
If the steering, shifter, and throttle response are sharp it should be, maybe added some sway bars, some bracing and removed weight within reason, then the overall feel of the car should suffice.
At the end of my turbo m20 and cammed/modded M52 escapades I would have happily gone back to an M20 with a 2.8, ITBs, megasquirt and a mild cam upgrade. Something that might only dyno 185whp but would be crisp, responsive, plenty of top end pull, and easy to work on
-
Sooo, the vibe I'm getting is if I'm planning on staying with a more or less stock m20 setup, the chip is worth it, albeit it will still be a slow car at the end of the day relative to modern cars.
I should have prefaced this with i do not plan leaving the m20 platform (at least with this one). I am going to rebuild my other m20 to drop in and maybe put in a real mild cam. I have had projects who's "fun" power curve was 100mph+ and the goal of the e30 was not to have a fast car, but a car that was fun in the curves in did burnouts.
-
So I had an appt scheduled for April 10 to have the tint removed on the bmw and have the XC70 tinted. I figured why not try removing it myself and see what happens. Used my heat gun to heat up the area I was working and a razor to get a corner started. After about 45 mins I had it all off. Must have been cheap tint. Still some adhesive I'll have to get off, but I absolutely love it without tint. Fits the car so much better.
-
so much better without! i think tint on old BMWs makes them seem less sleek and more top-heavy due to the amount of glass.
Dan
-
so much better without! i think tint on old BMWs makes them seem less sleek and more top-heavy due to the amount of glass.
I totally agree. I did not think removing the tint would change the look of the car as much as it did. It works so much better.
-
I totally agree. I did not think removing the tint would change the look of the car as much as it did. It works so much better.
No tint looks so much better, especially when you have a cool interior color!
-
a cool interior color!
someone should do a harlequin interior. one panel/part from every leather or vinyl color.
Dan
-
-
Looking great!! The wheel fitment is perfect
Thank you. I can't take credit on that, the car came with these wheels. But I agree, they fit awesome. I also like the look of the slightly chunkier 205/50/16 vs the 215/45/16.
-
Needs tint.
E91 328xi - F15 X5 40e - Hopes and dreams of eventually having a cool car
-
Zach, is the car I sold you??
Yep. It didnt work good, I want my money back.
E91 328xi - F15 X5 40e - Hopes and dreams of eventually having a cool car
-
Any plans to knock out that corner of the fender and hood? Doesn't look too bad.
I got it as best as I could. It's better than what it was before. And the hood has so many dings that there isn't a lot of motivation to do it. It needs a new hood. Also, I've kind of embraced the patina of the car. I've had the odd desire to own a car that was a little rough on the outside, but very clean where it counts. This one fits the bill.
Aldo, pro tip. The guy who was going to remove my tint gave me the advice to remove the glue: glass cleaner and 0000 steel wool. Worked like a charm and the glue came right off.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login