Chapter GMW | E30 LS1 (starting on post #1427)
-
Oil change at 1,327 miles. Valvoline Conventional 10w-30 and a Napa 1515 Gold Filter.
I also replaced a leaking CCV vacuum pump -12an 90* fitting and added a short radius 90* and a 120* fitting on the hose side to give me more space from the top of the oil pan.
@DrLeadFoot
-
More welding! Jake @ Rawspeed is just amazing. Worth every penny!!
He did my titanium/stainless exhaust and a lot of other odds and ends. Hit him up!
@DrLeadFoot
-
Prep has begun for the shock tower reinforcement welding!
Will be stitch welding the wheel well side of the stock shock tower also.
@DrLeadFoot
-
Subframe, diff, driveshaft and trailing arms installed!!
Wow my pics are blurry!
Used Nord-lock washers for the driveshaft/diff adapter. Accidentally threw one in the garage. I've successfully found the needle in the haystack.
@DrLeadFoot
-
I suspect Beers were consumed
By the camera apparently...
-
Maybe you should get the lady that shoots your houses to start getting photos of your car. For all of our sake...
-
-
Chipped away a little bit.
-Section 1 of the exhaust is bolted up.
-Axles in, need to torque them down.
-Torqued down rear swaybar mounts.
-Changed the trans fluid.
-NO BLURRY PICS!
@DrLeadFoot
-
Axles torqued down and driver's ebrake shoes renewed.
@DrLeadFoot
-
-
Reinforcements all done and stitch welded! Need to hit it with some flat black paint.
Just need to mount pass. side brake, bleed the brakes, install the titanium section of the exhaust and battery then start it up!
@DrLeadFoot
-
-
-
-
-
I usually take the Black Pearl out for closing days. Today is one of those! Closing on a Sussex condo this afternoon!
I've been getting a flickering oil pressure light that has turned to just being on all the time. My VDO oil pressure gauge has remained consistent so I thought some wiring bugs have peaked out. This morning, I dug through my nest of wires and coolant hoses to get to the oil pressure sending unit on the motor to see it was all oily. Popped it out and threw on the the sending unit that was on my s54 sitting next to me. Popped it back in, started it up and no light! Success!!!
@DrLeadFoot
-
An old buddy of mine, Jon (@thic_f30), was in town and took a bunch of pics and videos. He drove the wagon and I was in the E30. Video footage coming soon!
@DrLeadFoot
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login