Official-look-what-i-found-thread (craigslist, other-forums, etc)

[P_Roloff]

Jdesign said:

$1000 - But you have to remember its most likely twice as bad in person and its a 4 hour drive. Its a good deal because you can part it out for way more, but the problem there is that the buyers market is fairly small. 

Yeah, that’s a tough call. Maybe if he dropped a bit lower on the price. 

I vote you buy the m106 e23 and toss the motor from that into your car, now that’d be fun. Too bad the euro bumpers from that won’t fit a 6 series.

[Jdesign]

P_Roloff said:

Yeah, that’s a tough call. Maybe if he dropped a bit lower on the price. 

I vote you buy the m106 e23 and toss the motor from that into your car, now that’d be fun. Too bad the euro bumpers from that won’t fit a 6 series. 

Yeah if it was local I would have bought it and stripped it by now. ughhhh.

[HipMF]

cheap roundy project

https://detroit.craigslist.org/okl/cto/d/1969-bmw-2002-track-project/6536968092.html

[P_Roloff]

HipMF said:

cheap roundy project

https://detroit.craigslist.org/okl/cto/d/1969-bmw-2002-track-project/6536968092.html

But why a GM 4 banger when a m42 or something would’ve fit just as well?

[Boris3]

P_Roloff said:

But why a GM 4 banger when a m42 or something would’ve fit just as well? 

Swap logic is beyond me but maybe because more HP and TQ in the 2.4l LE5 versus the 1.8l in the m42?

Wonder if it's this guy? http://www.ecotecpower.com/forums/read.php?f=4&t=7838&a=2&arch=1

[Rekpoint]

https://milwaukee.craigslist.org/cto/6549290520.html

[jc43089]

P_Roloff said:

But why a GM 4 banger when a m42 or something would’ve fit just as well? 

Hey maybe he just likes replacing VVT actuators...

[Rekpoint]

https://madison.craigslist.org/cto/6549693991.html

Spend 6k then spend another 2k for maintenance after that.

Sent from my SM-G955U using Tapatalk

[GunMetalGrey]

Rekpoint said:

https://madison.craigslist.org/cto/6549693991.html

Spend 6k then spend another 2k for maintenance after that.

Sent from my SM-G955U using Tapatalk
 

Is it just the angle, or is the temp gauge reading high?

[Rekpoint]

GunMetalGrey said:

Is it just the angle, or is the temp gauge reading high?

Definitely on the higher side.

Sent from my SM-G955U using Tapatalk

[Boris3]

135i MSport "deal" for "knowledgeable BMW folks" per seller...

https://milwaukee.craigslist.org/cto/d/2008-bmw-135i-msport-package/6549205913.html

[suspenceful]

Boris3 said:

135i MSport "deal" for "knowledgeable BMW folks" per seller...

https://milwaukee.craigslist.org/cto/d/2008-bmw-135i-msport-package/6549205913.html

That's my buddy Alex's. I'd buy it if it were cheaper, but yeah, $9k isn't a great deal.

Apparently it's already sold.

[KaiserRolls]

P_Roloff said:

But why a GM 4 banger when a m42 or something would’ve fit just as well? 

Ecotec is fairly common with miatas. People like that they make 200whp right out of the box in stock configuration

I like them as boat anchors

[Rekpoint]

https://www.facebook.com/groups/E36.BMW/permalink/2041526259209624/?sale_post_id=2041526259209624

If only this was closer.

1997 328is with full M3 swap
All M3 parts came off a wrecked 1998 M3 with lower miles
Car now has 118,000
S52 with M50 manifold and Bimmer Life tune/Alex Fuller
Aluminum Mishimoto radiator with Euro expansion tank conversion
ZF 5speed 
Stromung rear muffler and catless mid section
Full M3 front and rear suspension and brakes, cross drilled Zimmerman rotors
K-Sport coilovers
M3 rear bumper no front bumper
Have M3 side skirts but not installed
M3 side mouldings 
M3 mirrors 
M-Rain fuller interior swap from 1994 325is M-Tech 
BMW MOTORSPORT front seat belts
Headliner, rear deck and A and C pillars are covered in synthetic suede
BMW MOTORSPORT door handles
RC041/RC042 wheels, could use a good polish.
Hood a roof are faded
Driver front seat need a little work
Car is not perfect but has A lot of good parts.
Only selling because of move to Germany and can't take it with.

$3000.00 firm

[Earl]

What a steal...

[Jdesign]

Rekpoint said:

https://madison.craigslist.org/cto/6549693991.html

Spend 6k then spend another 2k for maintenance after that.

Sent from my SM-G955U using Tapatalk
 

Besides the car almost overheating while the ants took the miniature pictures, I would like to note some cringe worthy statements:

"2.8 Lite V6"
 

"She did not choose the largest motor pkg. because she is not interested
in driving it hard or fast"

"she was not interested in any kind of high performance equipment or fast driving"

"Tires are in fair shape but will need to be replaced"

"The 328is in the M package was considered one of the best handling sports cars of all vehicles made in 1999 and for the next
decade or more"

[m42b32]

Rekpoint said:

https://www.facebook.com/groups/E36.BMW/permalink/2041526259209624/?sale_post_id=2041526259209624

If only this was closer.

1997 328is with full M3 swap
All M3 parts came off a wrecked 1998 M3 with lower miles
Car now has 118,000
S52 with M50 manifold and Bimmer Life tune/Alex Fuller
Aluminum Mishimoto radiator with Euro expansion tank conversion
ZF 5speed 
Stromung rear muffler and catless mid section
Full M3 front and rear suspension and brakes, cross drilled Zimmerman rotors
K-Sport coilovers
M3 rear bumper no front bumper
Have M3 side skirts but not installed
M3 side mouldings 
M3 mirrors 
M-Rain fuller interior swap from 1994 325is M-Tech 
BMW MOTORSPORT front seat belts
Headliner, rear deck and A and C pillars are covered in synthetic suede
BMW MOTORSPORT door handles
RC041/RC042 wheels, could use a good polish.
Hood a roof are faded
Driver front seat need a little work
Car is not perfect but has A lot of good parts.
Only selling because of move to Germany and can't take it with.

$3000.00 firm

Wow, that's almost scam level pricing... link isn't working for me so I'm guessing it sold?

[Earl]

Link works and it doesn't seem to have a buyer yet

[Jdesign]

Which is very mind blowing to me!

[wasnt m3]

I saw that this morning. If that car was even remotely local, I'd be taking the day off work.