WTB: 24V/M54 swap parts
-
Im not keen on the going rates for MAFs but this is an OE unit https://www.ebay.com/i/272885069168?chn=ps
-
Updated first post, found a gas pedal for cheap.
Im not keen on the going rates for MAFs but this is an OE unit https://www.ebay.com/i/272885069168?chn=ps
Thanks! I haven't shopped around on these yet since I don't need it right away, but that doesn't seem unreasonable for an OE one
-
St Francis Auto Wreckers shows 1997 528i exhaust manifolds for $35 each (front/rear).
-
The headers aren't going to fit? =(
Not without some work, they'll bolt to the head but one of the mid-pipe flanges hits the block and I'll need to add O2 bungs. This wouldn't be a problem but I don't have the capability to weld stainless at the moment. I'm thinking I can make the OBD2 manifolds work much easier, and then some time in the future I can modify the shorty's to work
-
I am going to be buying an m3 midpipe that comes with stock headers.If you are interested I can sell you the headers. Only problem is I'm quite far away.
Sent from my SM-G955U using Tapatalk
Tubular OBD2 manifolds? If they're cheap enough I'd pay for shipping
-
Not without some work, they'll bolt to the head but one of the mid-pipe flanges hits the block and I'll need to add O2 bungs. This wouldn't be a problem but I don't have the capability to weld stainless at the moment. I'm thinking I can make the OBD2 manifolds work much easier, and then some time in the future I can modify the shorty's to work
Do you have a mig with gas? You can buy spools of stainless and mig it.
-
Do you have a mig with gas? You can buy spools of stainless and mig it.
I have a mig that can be set up for gas (just need to buy a tank). I've never made an exhaust before, so I'd like to give it a go in mild steel instead of screwing up a bunch of nicer stainless parts
-
-
I think you need Tri-mix (Argon Helium Carbon Dioxide)
Paging @Bassboy3313
-
You have to buy a certain stainless wire that will work with standard 75/25 gas. When I get home I will look at the stainless spool I have and let you know the number.
Sent from my SM-G930R4 using Tapatalk
-
You have to buy a certain stainless wire that will work with standard 75/25 gas. When I get home I will look at the stainless spool I have and let you know the number.
Sent from my SM-G930R4 using Tapatalk
That would be awesome, thanks!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login