FuturisticConcept Art BMW E36 with a V8 on a bottom dollar budget

[Jdesign]

jc43089 said:

Sweet action!  I like it.

Thanks!

m42b32 said:

That looks fantastic!

Awesome thanks!

KaiserRolls said:

Needs more fender exit exhaust on a cut out

I have been pondering this for awhile now. I was thinking straight out the rear in the middle, or on the side above the rockers on the rear quarter.

[P_Roloff]

I really like the side exit above the rockers, that'd look sweet. Also, shooting fireballs would be cool.

[Jdesign]

P_Roloff said:

I really like the side exit above the rockers, that'd look sweet. Also, shooting fireballs would be cool.

That it would. hmmm..

[m42b32]

Hood exit zoomie headers!

[patsbimmer1]

Bosozoku.

[Jdesign]

patsbimmer1 said:

Bosozoku.

Thats a whole other culture. I dont think I want to go that route. 

[patsbimmer1]

Just the bosozoku exhaust style.  Not the whole shebang!

[GunMetalGrey]

I really dig those graphics, I also love the matte/satin black on the gloss black. Subtle but just right. 
Maybe add some bright green pin striping to critical areas?

[The Full Banana]

Very nice. That's the best part so far. Do it!

[Jdesign]

The Full Banana said:

Very nice. That's the best part so far. Do it!

GunMetalGrey said:

I really dig those graphics, I also love the matte/satin black on the gloss black. Subtle but just right. 
Maybe add some bright green pin striping to critical areas? 

You guys convinced me, it looks like I have some vinyl to start cutting.

patsbimmer1 said:

Just the bosozoku exhaust style.  Not the whole shebang!

Oh. Yeah I am not opposed to something like that, but I want to try and keep the rear of the car free of anything important. That way if I hit a wall, I can keep going(hopefully) 

I also am buying earls old centerlines and selling mine. Most likely going on this car. I shittily photoshopped them on above.

[stealthbimmer]

Needs horns

[Jdesign]

stealthbimmer said:

Needs horns

Like so?

[stealthbimmer]

Well, if you are going that route...at least put them in front for some ramming protection

I was thinking more, since you have the red theme, something like this 

https://www.amazon.com/Red-Devil-Horns-for-Cars/dp/B00IMM5R92

You know, make em light up if you want to get all ridiculous with it.

Or, since apparently 'tis the season already 

https://www.amazon.com/dp/B011XM9EKA/ref=sspa_dk_detail_2?psc=1&pd_rd_i=B011XM9EKA&pd_rd_wg=dJhX5&pd_rd_r=ZX3MDVFBK11MRHMYYEP7&pd_rd_w=eGHnK

[Jdesign]

stealthbimmer said:

I was thinking more, since you have the red theme, something like this 

https://www.amazon.com/Red-Devil-Horns-for-Cars/dp/B00IMM5R92

You know, make em light up if you want to get all ridiculous with it.

Or, since apparently 'tis the season already 

https://www.amazon.com/dp/B011XM9EKA/ref=sspa_dk_detail_2?psc=1&pd_rd_i=B011XM9EKA&pd_rd_wg=dJhX5&pd_rd_r=ZX3MDVFBK11MRHMYYEP7&pd_rd_w=eGHnK

HAHAHHHA I have never seen those little horns before. How silly. I would do that if I actually had legitimate plates on the car.

Speaking of which, I applied for another set of hobbyist plates yesterday for this thing. So when they show up in January I can finally "LEGALLY" drive the car come February!

[Jdesign]

Added some of the matte/ gloss vinyl and used the car to haul some wooden tire racks I built.

Blew the PS line apart again. Of course it happened right when I got into the shop. ughhhhhhhhhhhh.

Where can I go to get a custom line made? I really dont want to use AN fittings and this is super annoying. the place that I took this too makes HP hydro lines and they said this should hold 1000 PSI. LIESSSSSSS 

[HipMF]

I will ask around at work tomorrow. Pretty sure I remember someone talking about a local place that does custom hydraulic hoses cheap.

[Jdesign]

HipMF said:

I will ask around at work tomorrow. Pretty sure I remember someone talking about a local place that does custom hydraulic hoses cheap.

Please do!!!!.

I know that most auto parts stores have a press that can make them behind the counter, but this line they were unable to make. Once I get it out of the car I will post a picture of the actual line. Its half OEM Ford and half OEM BMW.

[Jdesign]

Jdesign said:

The guy at Hyquip said it should be good for up to 3000psi, I don't know if I believe him, but it certainly was a bitch to get on like all push-lok lines.

Well I guess he was wayyy off. 

[HipMF]

Jdesign said:

Please do!!!!.

I know that most auto parts stores have a press that can make them behind the counter, but this line they were unable to make. Once I get it out of the car I will post a picture of the actual line. Its half OEM Ford and half OEM BMW.

No one knew what I was talking about, so I must have made the whole thing up. Only suggestions I got were to check the farm equipment/bobcat places. Maybe call one of the equipment rental places and ask them where they go for stuff like that?

[Jdesign]

HipMF said:

No one knew what I was talking about, so I must have made the whole thing up. Only suggestions I got were to check the farm equipment/bobcat places. Maybe call one of the equipment rental places and ask them where they go for stuff like that?

Yeah. So since I am located on the outskirts of Madison surrounded by farms, the auto parts store by me makes hydro lines, but could not make the line I need. They suggested Hyquip, which was a good suggestion, but they couldn't make it either. Instead they suggested doing what I did, and sold me some fittings, but it still continues to fail.