'88 E30
-
car is built to do the exact opposite.
I avoid drift events for the same reason
-
Finally had some free time and dropped the head off today. He pulled vacuum on it while I was there. Intake and exhaust valves he said looked really good. So there's hope. Will be picking it up sometime next week
-
Picked it up Friday
-
Its interesting the changes they made in the oil and coolant passages between the M20 and M5X/S5X cylinder heads.
The number of oil feed passages is reduced, the size of the coolant passages is reduced (this doesnt mean less cooling, just look at the pinhole they put in a stock head gasket to meter the coolant flow) and all of the passages locate near a head bolt to maintain sealing when the head lifts ever so slightly. The oil returns also have more real estate around them (inherently from the head being much wider) which allows the gasket to be designed for reduced chance of external oil leaks.
What im trying to say is, get it back together soon so we can break s'more axles
-
Wow. A head.
I've never seen one before. Thanks for posting this. -
Wow. A head.
I've never seen one before. Thanks for posting this.
A somewhat douchey comment from Ben, this thread is full of firsts!
-
A somewhat douchey comment from Ben, this thread is full of firsts!
probably pent up aggression over the temp gun
Dan
-
KaiserRolls said:
A somewhat douchey comment from Ben, this thread is full of firsts!
probably pent up aggression over the temp gun
Just lost it rofl
-
A somewhat douchey comment from Ben, this thread is full of firsts!
You never hang out with Ben, do you?
-
You never hang out with Ben, do you?
You never hang out with Mitch, do you?
-
KaiserRolls said:
A somewhat douchey comment from Ben, this thread is full of firsts!
You never hang out with Ben, do you?
Lol yea I have, he made this last night because I called him a lurker.
-
As much as I would enjoy continuing to stir this pot I'll add a touch of context to my comment.
Pent up temp gun aggression is real tho
-
suspenceful said:
You never hang out with Ben, do you?
You never hang out with Mitch, do you?
I am a sarcastic douche most of the time
-
I'm sure the shop did this but make you look over all of the valve retainers super good. From everything I have read s50's built prior to 10/95 have retainer problems. The only reason I know this is because when I blew my motor up there were a couple ready to give out and let the valve drop.
-
I'm sure the shop did this but make you look over all of the valve retainers super good. From everything I have read s50's built prior to 10/95 have retainer problems. The only reason I know this is because when I blew my motor up there were a couple ready to give out and let the valve drop.
Assuming you replaced with 96+ retainers?
-
I am a sarcastic douche most of the time
You and I would get along just fine.
-
You and I would get along just fine.
He says after bashing me for it
-
He says after bashing me for it
No bashing here, just correcting him
-
did some VIN decoder stuff.
I have pre 10/95 build date.
new retainers have been ordered.
figure do it once and do it right so I dont have to worry about it
-
Good motto to live by.
https://www.instagram.com/_jdesigner_/ http://nevertoolow.tumblr.com/
🥳SOLD BMW E24 633CSI - BMW M30B32 🧪SOLD HCH ES9 - 1.3 LDA
👽BMW E30 325IC - Toyota 1JZ-GTE ⏰ HONDA EF9 CIVIC SI - JDM B18C5
☠️BMW E36 318i - Ford 5.0 FE302 🚴♂️ GT-Labomba - 26x2.75 Freeride
🤹♀️SOLD BMW E36/7 Z3 - BMW M54B25 🧓SOLD BMW E10 2002 - BMW M10M05
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login