Rubber floor plug?

[Earl]

You can order them new. Check realoem.com to get the exact part number

[Boris3]

Thanks. Figure I'll patch the floor for the other hole. The metal floor stub piece that the gas pedal fits over is about 3/4 rusted through. Just try to fab a new piece or are there other options for rigging the gas pedal?This is the daily beater so functional ideas win over pretty.

[Earl]

The girlfriends gas pedal mount rotted of the floor and somehow works well staying in the carpet lol. I need to tackle that repair there. Cutting the pedal out of a donor car is all I can think of

[KaiserRolls]

As crappy as it is to do, could get the bondo fiberglass kits & do the area in question.

I did this to my drivers side floor after it was patched with some welds. It does not leak any more.

I also tossed my stock carpet because it was disgusting and never dried.

[KaiserRolls]

^^^i did not have a gas pedal issue though

[Boris3]

Earl said:

The girlfriends gas pedal mount rotted of the floor and somehow works well staying in the carpet lol. I need to tackle that repair there. Cutting the pedal out of a donor car is all I can think of 

Actually that's not a bad idea. Fab a sleeve over the base of the pedal that's held in place by the carpet.

[SamHolzmann]

I believe that i could cut the patch panel/gas pedal out of my parts car if someone wanted, but it may have to wait for the weather to cool down since i believe there is a wasp nest inside the car or near it.

[Boris3]

Thanks. Avoid the wasps or nuke from a safe distance.

I cleaned the pan and patched things up with a piece of sheet steel and seam sealer for the rust hole. We'll see how the gas pedal holds up. Went with a plug and rtv for the drain plug hole. Remembered that I did this with the race car and its held up fine.

[straight6pwr]

i was going to suggest aluminum foil tape

"in the end, all that will be left is cockroaches, Twinkies, and aluminum foil tape (still sticking) in the burning piles of ash. "

or something like that.

[Jdesign]

Most auto parts stores have a "help!" section with various rubber caps and plugs that should fit in there if you cant make it to a dealer.