Lifted E30 V2
-
garagistic carries an add-on second diff ear. pretty cool piece of hardware.
https://store.garagistic.com/bmw-performance-parts/bmw-motor-swap
Dan
-
garagistic carries an add-on second diff ear. pretty cool piece of hardware.
https://store.garagistic.com/bmw-performance-parts/bmw-motor-swap
There is a diff mount from an Evo(?) that does the same thing actually, pretty neat. I would have to double check with the guy who did it, but he is local and it looked perfect! The additional plates that needed to be made would be easy and quick as well.
I would have a hard time justifying $200 for that kit for this car!If it wasn't obvious the cost on this is attempted to be kept low, but sometimes that doesn't happen lol.
That does look like a nice bolt on solution though!
-
I am interested in this Evo diff hanger idea you speak of for when install my e30 rear end on the e21. Also, I have a bunch of random m20 parts BNIB if you want them. Radiator rubber mounts, shifter parts, misc seals, etc.
-
I know this sounds sort of weird but could you make flairs out of Rubbermade garbage can lids? Those would be flexible enough to take abuse.
-
I know this sounds sort of weird but could you make flairs out of Rubbermade garbage can lids? Those would be flexible enough to take abuse.
Go big or go home, kiddie pool flares
Actually though, not a bad idea for something super durable, and only a few bucks to replace if you do trash it
-
oh, i like these ideas.
here's more DIY solutions from mudder truckers:
http://mallcrawlin.com/forum/showthread.php?16119-DIY-Fender-Flares
http://www.truckcustomizers.com/p-53-pacer-performance-flexy-flares.aspx
Dan
-
Got some more work done last night!
Put some new plugs in, which clearly needed to be done... Replaced the Mighty Power Core plugs with some Bosch units.
Got the power steering pump back on, connected the heater core hoses, put the fuel lines one, did some coolant hoses and other various bits.
I added oil and gave it a crank to get some oil flowing through then plugged the fuel pump fuse in to see if my work payed off right away.
The heart transplant was successful! It felt pretty great to get that on the first try!
The car never wants to idle, it didn't last year, it didn't in the winter, it didn't in the summer. I tried a different ICV at one point with no luck, and now I just have a sharpie stuck into the ICV hose so that there is no vacuum leak, but I would really like it to actually idle. The motor is from an 87 325e which I believe had a separate control unit for the ICV, so I'm wondering if that is bad? Something to look into!I also made a bit of a sketch for my fender flare idea. I had the idea in my head, and it looked okay there, but it looks a lot better than expected on paper! I could only find a sketch of a lowered e30 and I didn't feel like messing with it that much, so it is just to demonstrate the flare idea . It is kind of what GMC/Chevy (?) use for their flares, the square style fender cutouts. I am going to see if I can find some measurements for the size of what comes off those trucks and see if I can just use a trimmed set. I suppose a junkyard browse wouldn't hurt either, as I think jeeps may use a similar style.
-
I am interested in this Evo diff hanger idea you speak of for when install my e30 rear end on the e21. Also, I have a bunch of random m20 parts BNIB if you want them. Radiator rubber mounts, shifter parts, misc seals, etc.
Just asked him and he said it was a stock Evo 8 front engine mount
-
Just asked him and he said it was a stock Evo 8 front engine mount
I see it now.
I assume he bolted or welded this Evo 8 mount to the frame of the car and then made his own mount plate to bolt between the diff cover and this mount. Pretty slick.
-
I also made a bit of a sketch for my fender flare idea. I had the idea in my head, and it looked okay there, but it looks a lot better than expected on paper! I could only find a sketch of a lowered e30 and I didn't feel like messing with it that much, so it is just to demonstrate the flare idea . It is kind of what GMC/Chevy (?) use for their flares, the square style fender cutouts. I am going to see if I can find some measurements for the size of what comes off those trucks and see if I can just use a trimmed set. I suppose a junkyard browse wouldn't hurt either, as I think jeeps may use a similar style.
I am curious to see what you use. I have had the thought of just using truck flares or something similar on my E36 but I cant find anything that I wont have to cut into 6 parts to make it fit. I was thinking small trucks like an S10 or ranger, also suzuki samurai would be a good one. I only managed to go to one yard to look and came up empty handed.
https://www.instagram.com/_jdesigner_/ http://nevertoolow.tumblr.com/
🥳SOLD BMW E24 633CSI - BMW M30B32 🧪SOLD HCH ES9 - 1.3 LDA
👽BMW E30 325IC - Toyota 1JZ-GTE ⏰ HONDA EF9 CIVIC SI - JDM B18C5
☠️BMW E36 318i - Ford 5.0 FE302 🚴♂️ GT-Labomba - 26x2.75 Freeride
🤹♀️SOLD BMW E36/7 Z3 - BMW M54B25 🧓SOLD BMW E10 2002 - BMW M10M05 -
I have a few ideas in mind, but a junkyard run will let me confirm some dimensions and maybe pick something up that will work.
You are going on an e36, so the sizing is a bit different but I'll keep an eye out.
I'm not opposed to cutting stuff apart for this, so that does open up my options a bit. -
I have a few ideas in mind, but a junkyard run will let me confirm some dimensions and maybe pick something up that will work.
You are going on an e36, so the sizing is a bit different but I'll keep an eye out.
I'm not opposed to cutting stuff apart for this, so that does open up my options a bit.Same. I like getting creative with parts from other cars. Let me know if you find something worthwhile.
https://www.instagram.com/_jdesigner_/ http://nevertoolow.tumblr.com/
🥳SOLD BMW E24 633CSI - BMW M30B32 🧪SOLD HCH ES9 - 1.3 LDA
👽BMW E30 325IC - Toyota 1JZ-GTE ⏰ HONDA EF9 CIVIC SI - JDM B18C5
☠️BMW E36 318i - Ford 5.0 FE302 🚴♂️ GT-Labomba - 26x2.75 Freeride
🤹♀️SOLD BMW E36/7 Z3 - BMW M54B25 🧓SOLD BMW E10 2002 - BMW M10M05 -
Your secondary diff mount drawn up, my friend! Jut have to determine how long the 3 bolt spacers need to be to offset the mount the correct distance from the cover.
-
Your secondary diff mount drawn up, my friend! Jut have to determine how long the 3 bolt spacers need to be to offset the mount the correct distance from the cover.
Did you have a diff cover laying next to you? That was quick if those are true dimensions!
I am thinking I should go dual ear in both e30's, so I will be using the lifted one as the test bed for parts. -
Yes I did. I had an e30 diff cover in the car, so during my lunch break I grabbed it, scanned it into the computer and drew it up quick.
-
I wish we had a small scale 3d scanner at work. We use a scanner to scan paper mills through multiple scans and targets which is really cool and useful for work, but we have no use for a smaller scanner ;/
-
I just used a regular office scanner to scan the bolt pattern on the diff cover, lol
-
Ha, I have totally done that with things before!
-
I am annoyed.
I just typed out a whole update and instead of switching tabs I closed the tab. The last saved draft was a response to something else.
Well, update later I guess!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login