Dirty Delphin Progression Thread
-
my car came with those wheesl when I bought it! you didnt pick them up from a guy in illinois did ya?
Dan
-
I did actually lol
He was from Naperville I believe.. This isn't where you tell me that they had 15 bends and 4 hidden cracks, right? lol
In other news: blew my tranny this weekend down in Madison. Total cost so far is$72 for a tow, $48 in gas to have my uncle with a car dolly come down and grab me, $35 to rent the car dolly, and $47 food bill for my uncle, brother, and I to eat on the trip home. Now I'm gonna pick up a tranny from Matt, install new bushings/change fluids while its off, and then hopefully install and be on my way..
-
Ryan... said:
I did actually lol
He was from Naperville I believe.. This isn't where you tell me that they had 15 bends and 4 hidden cracks, right? lol
Paladin? Nah, they were in really good shape when i sold them. only one spot of curb rash and a little clear-coat peal. Looks like he put some new tires on there which is good.
Dan
-
These have the same issues you describe, very minor rash on one wheel, and a couple little clearcoat issues. He put some federal 595 tires on them, and the camber wear is almost unreal! Just picked up 2 dirt cheap Yokohama tires to slap on for the time being. Once my other summer jobs start up I'll get a nice set of matching tires lol
-
as to be expected i believe he was running GCs and had the car pretty low. luckily i've never killed a set of rear tires on an e30 from camber wear.
Dan
-
Well... Installed the new rims tires today, 205 45 16 all around. What I've determined so far is that I need to be at least 1.5" lower up in front
http://bimmerfest.com/forums/attachment.php?attachmentid=276314&d=1303859362
http://bimmerfest.com/forums/attachment.php?attachmentid=276315&d=1303859362
http://bimmerfest.com/forums/attachment.php?attachmentid=276317&d=1303859362
http://bimmerfest.com/forums/attachment.php?attachmentid=276316&d=1303859362
-
Liking the new look! I am almost done!
-
thanks guys, I"m really considering going to the dark side and selling my suspension setup.. I'd pick up some cheap JOM coilovers to really get the drop I want. This car is my DD, so I dont really need a stiff sport suspension anyways, and everyone on R3V seems to be happy with their $400 JOM kits..
-
Buy a JOM kit, then donate your current suspension to me!
-
Ryan... said:
Well... Installed the new rims tires today, 205 45 16 all around. What I've determined so far is that I need to be at least 1.5" lower up in front
http://bimmerfest.com/forums/attachment.php?attachmentid=276314&d=1303859362
+1 for more lows up from, but it sits pretty nicely considering that late models always have a negative rake look about them
-
yeah man, 205s your next time around will fill the fenders back up like the pictures with your weaves = perfect drop. from what i've heard, the ride quality of the JOM kit will be worse than your current setup. sacrificing ride quality for adjustability is a step backwards, if you ask me.
Dan
-
Yeah, I'll probably search around for some used 205 50s on CL to see how they fit. From what I've read so far on R3V, and through PM'ing a couple members running them, they really aren't that bad. You can order vert springs for no extra cost (same height, just stiffer), which would keep it from being very bouncy. The IE springs aren't very stiff, so I'm kind of curious how the two setups would compare to each other on a DD that sees over 10k miles a year of straight road commuting?
-
IE springs are progressive, so they feel softer in their first bit of travel then stiffen up. the JOM kit would be bouncy not because of soft springs, but because of cheap/soft dampening from the struts not properly matched to the spring rate. the JOM kit + bilstein or koni sports would be better.
maybe i missed it, but why did you want to go with the JOMs?
Dan
-
I thought about just keeping my Bilstiens and buying the ground control conversion, but the reason for ultimately wanting to switch setups; go a little lower than I am now. Looking at pics of people running the JOM kits, they're getting awfully low. If I could drop another 1" up front I'd be happy, and cutting springs will most assuredly never happen..
PS: do you know why I cant enable an avatar? Is there a post count limit or something?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login