5 speed clutch, dual mass flywheel

[cpandrewschmidt]

Hi all,
I'm going to do a 5 speed swap in my 1991 325i. Trans has the dual mass flywheel. I prefer the smoothness of the dual mass as I don't track or drive hard so don't need the single mass. Won't ever turbo the car. Just a convertible cruiser. 

I need a new clutch and pressure plate. Sachs FX heavy duty clutch and plate new on ebay is $125. Again, don't need anything fancy, just need it to work. So, don't want to spend a ton. 

http://www.ebay.com/itm/SACHS-FX-HEA...NRw5X2&vxp=mtr

Will that work for dual mass? I can't seem to find anything that is specific for dual mass flywheel. When I look at PelicanParts I only see ones that are for the single mass.

Thanks for the help,
Andrew

[patsbimmer1]

That should work fine.  It looks like an OE style clutch.

[jc43089]

Sprung hub is typically for a single mass, the dual mass clutch usually has a solid center because the flywheel does the damping. Look for Sachs on rock auto. I put a single mass on an e30 (manual swap) if I remember right the clutch disc and pressure plate are different.

Sent from my 831C using Tapatalk

[cpandrewschmidt]

hmm, on rock auto the sachs still looks the same?  

[jc43089]

I would verify the part number on a reputable site like pelican or bavauto. I just meant rock auto may have the best price. It also might be a stock photo.

Sent from my 831C using Tapatalk