Jake's Epic BMW 135i Build Thread! (5+ Years of Ownership)
-
http://turbolabofamerica.com/bmw-135i-535i-335i-turbo-wastegate-rattle-repair-fix/
3 seconds of google begs to differ.
I do recall them being in good shape, and I could see it being a lot of work to do those.
I should've clarified... no fix available that doesn't require removing the turbos.
A few people have used those Turbo Lab parts, but most just put in upgraded twins since they need to be removed anyways.
-
Yeah that makes sense.
Who wouldn't want new turbos?!? Other than the wallet funding them..... -
I just wish that BMW on Victory Lane wouldn't have dicked me around when I first bought the car. It was eligible for turbo replacement but they put it off until I was over the mileage.
-
this isn't your daily driver. just DIY it so you can save a couple bucks and get your new turbos sooner.
-
this isn't your daily driver. just DIY it so you can save a couple bucks and get your new turbos sooner.
That's the plan!
-
Lol, if this isn't the most depressing log I've ever seen.
Doesn't hit full boost on these tiny twins until 5k RPMs. Everyone else hits max boost at like 3k RPMs. It's a solid 3.5psi under target the whole way as well.
After I took the log posted below (~91 pump gas), I filled up with an E55 mix and was able to hit 16.5psi.
I have a weird suspicion that JB4 isn't helping me right now. I might try just flashing the ECU with MHD instead of using a piggyback to see if I can gain some spool time and boost back. Otherwise... it's time to start stacking cash for a turbo upgrade.

-
Ouch! I'm so thankful I was able to get my turbos taken care of under warranty when I did. Bright side, you're going to have one hell of a car once your all done! 700whp or bust!
-
Ouch! I'm so thankful I was able to get my turbos taken care of under warranty when I did. Bright side, you're going to have one hell of a car once your all done! 700whp or bust!
I'm kicking myself for not being more persistant about it. Everything else on the car is new and I just walnut blasted it as well.
We'll see what it puts down on the dyno in two weeks. I have a feeling it'll still be decent numbers, but not what I was initially hoping for.
-
rofl Pat. 700 whp on the street would be utterly useless in this car. You would need to be able to stuff a 295 or 305 tire on the back to have any prayer of hooking up and that is physically impossible without ponying up for widebody flares + paint == a few thousand bucks, and if you don't do the front flares as well your 135i then looks completely retarded.
with slicks at airstrip race events you could get away with 265s but on street tires, no chance of traction unless you are running wider. Don't encourage him to ruin his car

-
rofl Pat. 700 whp on the street would be utterly useless in this car. You would need to be able to stuff a 295 or 305 tire on the back to have any prayer of hooking up and that is physically impossible without ponying up for widebody flares + paint == a few thousand bucks, and if you don't do the front flares as well your 135i then looks completely retarded.
with slicks at airstrip race events you could get away with 265s but on street tires, no chance of traction unless you are running wider. Don't encourage him to ruin his car
Utterly useless... but not impossible.
-
Look at the log I posted a few days ago, then look at this one. Note the boost level and the RPM that I reach full boost. My dick is so hard.

-
So what's physically changed with your car? Was it the flash tune?
-
So what's physically changed with your car? Was it the flash tune?
Nope. It was my dumbass fault. When I was installing inlets, I tried tightening the wastegate rod to eliminate the rattling. After seeing the poor performance, I wondered if I loosened it instead. I got under the car and beat the shit out of my arms to spin the rod the other way. Sure enough I actually loosened the rod the first time around. Now that it's tightened back up, the car hauls ass.
-
live and learn but I'm not surprised at all - I've never really had to adjust the actuator rod but from what I read it's super sensitive. Glad you got it fixed in time for NFZ ! in 4 vidz
-
Haha that's awesome. At least you figured it out!
-
Whipped up a custom kill tune for a glory run on the dyno and if I need the edge during a street race. I can switch to this map with a press of a button on the steering wheel. Targets 23psi with a slight taper to redline. Probably room for a little more, but I don't want to push the limits (I already am, LOL).

Also took a picture of my car while I was out.

Old Gas Station by Jacob Spence, on Flickr -
What does your timing look like?
-
that's gross, in a good way. Are you still getting on the dyno before NFZ?? You should just run at 23 target all the time so your turbos burn out faster and you have a good reason to upgrade

-
What does your timing look like?
Overall, I think it'll be fine for a dyno run or if I need it. Timing is pretty good overall. A few drops map 6, but I think it might be sensing false knock.
that's gross, in a good way. Are you still getting on the dyno before NFZ?? You should just run at 23 target all the time so your turbos burn out faster and you have a good reason to upgrade
Yup, dyno tomorrow. I'll see what it puts down on my custom map, but I'm going to dyno on map 7 as well. That's the map I plan on running most of the time. Not trying to blow these up. Besides the rattle, they seem to be holding up just fine!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
