BMW v8 engine coffee table project
-
back to it:
i settled on some bmw coasters. scale models of BMWs with the m60 engine are hard to find (1:18 scale, particularly, but 1:24 too) no 840 or 540 models, boo.
not sure if this is a real BMW part number, but they sure seem quality and are never used.
Dan
-
Those coasters look fantastic!
-
thanks! the part number doesn't give me any results, so not sure where the heck these came from. super duper uber unicorn rare!
Dan
-
sadly, no. had to so some other projects like refinishing a desk for a friend, making secret santa gift, and making some ornaments for white elephant parties. maybe ill get some time on this on the weekend. next up is connecting castors to the block, then painting it.
Dan
-
updates! if you are allergic to cats, leave now.
Before I finish the block (polishing and painting) I wanted to figure out the feet. The block could be left alone and just set on the floor, but this will help with moving the table and not scratching nice floors.
Here are the front feet. used the oil pan bolt holes, a nut/washer and bolt and some rubber table feet. height adjustable for leveling!
Here is our cat inspecting the feet that I just installed to make sure they are up to code. (this actually happens in a lot of photos, those who have cats know what Im talking about)
I decided to use casters as the back feet to ease in moving the table around. I used some 1 1/8" square aluminum tube, medium duty non-marking fixed casters, and plastic end caps.
Installed with m10 bolts
Here is the the gap achieved. Will work unless you have 70s shag carpet.
Dan
-
Russian Blue?
-
Russian Blue?
nah, just a domestic shorthair (blue is one of the colors they come in)
Dan
-
Mittens does that to me all of the time. I love the way you mounted those casters=)
thanks!
Lovin the "gap" in the last pic!!!
what guy doesn't?
i missed a golden opportunity, thanks for reminding me!
amidoingitright?
Dan
-
masked and primed the block the last couple of days.
this was the worst of the masking:
just a rando pic of the primer on the block:
Dan
-
so i really wanted to make a set of shorty headers, but after some research and experimentation, it just cant happen. so what i decided to do was emulate the style of this honda indy display motor, and just have short outlets.
so i'm making the flanges out of oak, and the tubes out of aluminum tubing. once together, i will spray paint them with some sort of metal-look finish.
here are the flanges being cut out:
on the drill press
flange in place, measurements were correct!
Dan
-
Whoa, this is getting cooler and cooler
-
Super awesome man! Keep it up!
-
the stock stamped steel ones? they are pretty ugly, some of them are even T-shaped leaving the head. have any pictures, anyways? i'm curious if m62 looks much different than m60.
Dan
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login