1991 318is M62B44 Build
-
What DNA radiator are you running? Looks to be thicker than an e30/e36 one
It is supposed to be for an E30. I wish it was wider, but I will wait to see what my coolant temps are and change if needed.
I ended up not getting to my shop this weekend. Any diagrams on r3v or in the bentley?
Haven't looked any further into the wiring. I got as much done on the exhaust as I can until my hangers show up. Pretty happy with everything thus far.
-
If it is a TUB engine, they are used for air/fuel I believe. The early models do not use them for anything other than cat monitoring, as Snap said.
-
Not TUB. Thank god.
Showers ftw
-
TU = totally useless.
just set the cams to 'hot' and leave them alone BMW, this isn't risotto.
Dan
-
A lot of my exhaust was just tacked up so I finished as much as I could before running out of argon yesterday. Started the wiring and just picked up some more argon to hopefully finish the full exhaust this weekend.
Bad news is I seem to have a rear main seal leak or a transmission seal leak.
-
Mine was leak free for about 2 weeks. Came out to the garage and I saw a tiny drop under the car.
Instant sadness
-
Pulled an all nighter Friday and got the motor harness all hooked up and some more work on the exhaust.
I have most of the wires identified and know where they need to go and think I have the EWS figured out as well.
Probably 10 hours from firing, but still have a lot of driveability stuff to do (finish brakes, clutch line, cooling, etc)
-
First starts make it all worth it man. Just please do it open headers at least once
-
Since I picked up those 17s, I figured I would post up the ACs on Craigslist. Unfortunately someone bit and they are gone...
Still trying to figure this damn wiring out. I may bite the bullet and pick up a tuned DME that doesn't require EWS, but I would need a new engine harness and knock sensors.
I'm justify it because of the additional HP.Â
-
I figured I would post up the ACs on Craigslist. Unfortunately someone bit and they are gone...
Noooooooo if I would've known I would've bought them in a heartbeat
-
PM'd you. It happened really fast. I'll probably regret it sooner than later.
Anyway... ECU, engine harness, and knock sensors ordered. Should all be here by Wednesday. I am going to finish the exhaust, plumb the brakes and clutch, etc. Basically get it ready for the road so I can take it out next Saturday/Sunday. Hell, I haven't even registered it yet.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login