E30 Early model "square c101" harness plug to "round c101" conversion
-
My 84 e30 came with the square c101 plug running from the fuse box and want to convert to the round later model e30 c101 plug. If anyone has ever done this and could give some insight about the subject it would be much appreciated.
-
Are you swapping motors or just doing it for fun?
-
cleanest/easiest way is to use an engine side plug of a square c101 and wire it to the c101 plug to make an adapter. just use the pin locations to match the correct wires, as wire colors will not all match.
Dan
-
For a swap
-
I did this on a friends 84 318 for his m50 swap, just put the square plug onto the motor harness because there is a lot more wire to work with if you don't get it right the first time.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login