chit chat thread
-
The whole thermostat thing wouldn't have been a huge deal expect for the fact that you cannot get just a thermostat. The OEM part number is for the assembly, including a thermostat.
-
I think the correct terminology is a check valve. It's holds oil in the filter housing to prevent a dry start. A coworker recalls buying them online somewhere for like $5 but doesn't remember where. It looks like you are missing some material there. What motor is this off of? The housing I posted is from a M54 for reference.
Sent from my iPhone using Tapatalk
-
The housing is from an S52 Euro, or S54 as they both use the same housing and a factory oil cooler.
It is not a check valve, it is a thermostat. It lets ~10% of the oil past it when the oil is not at temp. and once the oil gets to temp it opens the thermostat and diverts ~90% of the oil through the cooler.
The check valve for these is right under the actual filter.
Edit: is that a picture of the block? M54's don't have metal OFH's to the best of my knowledge. I have only seen plastic ones on them. -
That white and gold housing is from a 06 X3 M54B30.
-
Well it's a deal. I am leaving the great state of Wisconsin. Moving to Austin, MN area. I am now a senior electronic technician for our Engineering R&D group. I think this will be a fun job, basically a junior controls engineer.
Now to sell my house... Anyone want to move to Platteville? Everything redone on the house, nice warm garage with 60A 240 service...
-
John it's a shame you'll have to be banned now. MN and all...
-
John it's a shame you'll have to be banned now. MN and all...
-
Friday finally!!!
Possibly my last Friday as a carpenter.
Supposed to be switching to ironworkers union next week (Monday) or the week after.
Pay is close.....I think a dollar an hour more.
Benefits......much better!!!
What prompted the switch?
Sent from my potato phone
-
What prompted the switch?Sent from my potato phone
A good majority of the work I do in the door industry would be considered ironworkers work.
Rolling doors, high speed doors, fabricating, dock equiptment, etc.
The carpenters and ironworkers unions both recognize that there aren't enough of either to do all the work. "Composite crews" (one of each) are allowed. Hiring guys out of the union halls can be hit or miss when it comes to door experience....more miss honestly.
With me having 20yrs experience and approx 20 more years to work it makes good sense to switch and be a "company" iromworker.
Hope this makes sense.
-
Changed the ATF on the van, now i want sweet and sour chicken.
I was looking for the trans oil capacity and found siennachat forums. i saw an offtopic section. I didnt dare venture in, but im sure the threads are like "Does anyone else hate the way Huggies brand diaper wipes smell?!?!?"
-
Aloha from Earl and Andy.
Sent from my iPhone using Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login