17" wheel fitment on a E30
-
What offset? With a roll the biggest I have seen out back was a 235.
I run 225/45 square.
-
The wheels Im thinking about getting are 16x8 et 20 and 16x9 et 15 rear. You guys tell me. Whats gonna fit with minimal work..ie no fender pulling.
-
I think he suggested the 245 because its spec for a 9" wheel. I just want em flush and filling the wheel well.
-
Stock size sure will. Go to r3v and under the wheel and tire thread there are hundreds of people asking about specific setups and getting answers. Give it a look.
-
What about 205/40 fr and 225/40 rear.
-
And will the 40 series be tall enough to fill my wheel well? Your car looks a bit lower then mine classE
-
-
fitment calculator
Thanks. Now I need to know the stock specs for the 14" BMW wheels
-
Here's a 16"x9" ET10 on a 205/40..... A 245 or 235 is gonna be...."tight".
My fenders are rolled, but a "flat" sideway I don't think will fit at all.
Are you running 16x9 with the 205/40 square? Also are those the smiley headlights? I dig those.
-
Are you running 16x9 with the 205/40 square? Also are those the smiley headlights? I dig those.
Those are just ellipsoids, an ellipsoid "smiley" looks like this.
-
Yeah that is a square setup on Collins car=) I think he may have a small spacer in the front or rear too. Fat tires definitely won't work all that well with the offsets your thinking though. 205/40 is what I would run if I had 16's. I have 205/40's on my 9.5's and 215/40's on my 10's.....my "fitment" is a little different than what you are after though.
-
are you going to be stock power level and not trackin or racing the car?
Just the conforti chip for now. I am gonna do some light auto cross but will just use stockers fir that. I think I am gonn go with the 16x9 square setup with the 205/40's. I'm diggin the fat lip all the way around.
-
-
if you want better looks and better handling in one fowl swoop,
16x7.5 205/50
16x8 225/45
17x7.5 215/40
17x8 235/40 (roll fenders)
all should have an offset of about et20
anything wider than 8" and you lose performance in your tire, because you can't use the proper size.
if your car is not lowered, i'd go 15" or 16"
Dan
-
if you want better looks and better handling in one fowl swoop,
16x7.5 205/50
16x8 225/45
17x7.5 215/40
17x8 235/40 (roll fenders)
all should have an offset of about et20
anything wider than 8" and you lose performance in your tire, because you can't use the proper size.
if your car is not lowered, i'd go 15" or 16"
My car is lowered on h&r race and e90 hats
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login