540i: Resonator/Muffler delete.
-
You are correct there, and it should be the exact same exhaust. I always planned to put a turndown pipe in its place, but never got around to it. Now I have other plans anyway, since my car is completely torn apart. My exhaust is off entirely if you would like pictures of anything also. I would definitely recommend it though. Very slight loss in bottom end torque (almost unnoticeable), but definite gains in top end power.
As far as the dual exhaust option, it would require cutting/modifying the spare tire tub, as there is no room for a pipe on the passenger side. I would stay away from that personally.
Yeah, if you could post some photos, that'd be great!
E91 328xi - F15 X5 40e - Hopes and dreams of eventually having a cool car
-
Not a problem. It'll be a day or two before I get to it, but I'll see what I can do for you. I should really start a thread for my car at some point too....
-
.As far as the dual exhaust option, it would require cutting/modifying the spare tire tub, as there is no room for a pipe on the passenger side. I would stay away from that personally.
Or do dual pipes side by side like my 540
also, another person to join our 540 gang when we go to meets Dom! I really need to do my exhaust too, I'm just cutting out my cats and stock resonator and putting a magnaflow resonator on. If you want Zach, we could team up and knock both of our cars out when I'm home in a week.
BMWCCA #499464
Current - 1995 540i/6 V 2.0 | Dead - 1995 540i/6 | Sold - 1995 318is
-
I'm all the way on Lake Michigan, otherwise I'd be game. I'm going to do my exhaust work about the same time I do my trans flush/filter change/diff flush.
Sadly, my car is an i/A, so I'm like the bastard child of the 540 clan. Like Jon Snow, but a total bitch.
E91 328xi - F15 X5 40e - Hopes and dreams of eventually having a cool car
-
I'm like the bastard child of the 540 clan. Like Jon Snow, but a total bitch.
I'm sure we could make an exception but I'd have to consult Dom. On the over on Lake Michigan part, I will more likely then not head over to Milwaukee area for a visit to some family friends (Chris, Aaron Anding wants us to visit) maybe we could work something out where when I'm over there there we can do it that weekend and then Chris could could just be there because party, then have a party. My friends are flexible so we could plan something and get all the stars to align just right.
BMWCCA #499464
Current - 1995 540i/6 V 2.0 | Dead - 1995 540i/6 | Sold - 1995 318is
-
.As far as the dual exhaust option, it would require cutting/modifying the spare tire tub, as there is no room for a pipe on the passenger side. I would stay away from that personally.
Or do dual pipes side by side like my 540
also, another person to join our 540 gang when we go to meets Dom! I really need to do my exhaust too, I'm just cutting out my cats and stock resonator and putting a magnaflow resonator on. If you want Zach, we could team up and knock both of our cars out when I'm home in a week.
Woohoo, the gang is growing! (And yes, I think we can make the exception.)
I plan on doing a very similar exhaust setup once I get everything done and put back together.
-
I second an M5 rear bumper cover for true duals.
Simply cutting off the dead end donkey dick thing under the car should not hurt performance, but it is a major percentage of the total resonator volume, it will make it louder and possibly add a drone.
If it were me, I'd cut the entire stock resonator thing off, make custom dual exhaust from the Y back. I'd weld in two tuned resonators (magnaflow or similar) and hand two smaller mufflers in the rear (again, magnaflow or similar).
I've never looked underneath a 540, but can you run a passenger exhaust and keep the spare?
-
Someone in the 540 clan should really think about buying mine. It was badass.
-
Someone in the 540 clan should really think about buying mine. It was badass. https://m.flickr.com/#/photos/121188167@N08/15508368719/
Im ballin on a broke ass college kid budget and my 540 is a e34, probably won't bolt right in.
I plan on doing a very similar exhaust setup once I get everything done and put back together.
Your in Milwaukee too, might as well do all the 540 gangs exhaust done this winter. On a second note, WIbimmer 540 gang stickers. A necessity.
BMWCCA #499464
Current - 1995 540i/6 V 2.0 | Dead - 1995 540i/6 | Sold - 1995 318is
-
I second an M5 rear bumper cover for true duals.
Simply cutting off the dead end donkey dick thing under the car should not hurt performance, but it is a major percentage of the total resonator volume, it will make it louder and possibly add a drone.
If it were me, I'd cut the entire stock resonator thing off, make custom dual exhaust from the Y back. I'd weld in two tuned resonators (magnaflow or similar) and hand two smaller mufflers in the rear (again, magnaflow or similar).
I've never looked underneath a 540, but can you run a passenger exhaust and keep the spare?
It may be possible, but I have not thought seriously enough about it to warrant giving it a try. If it is possible, I would imagine it could be rather difficult, and may hang down lower than the underside of the car.
Your in Milwaukee too, might as well do all the 540 gangs exhaust done this winter. On a second note, WIbimmer 540 gang stickers. A necessity.
I am just north of Milwaukee by about 40 miles (only about 15 from Zach), but my car is no where near ready to have an exhaust put on. It currently has the engine and tranny removed and half of the engine is apart with more to do.
I like the sticker idea though, definitely necessary.
-
I am just north of Milwaukee by about 40 miles (only about 15 from Zach), but my car is no where near ready to have an exhaust put on. It currently has the engine and tranny removed and half of the engine is apart with more to do. I like the sticker idea though, definitely necessary.
Well we can bring your exhaust over and cut it up just to get it done or you can come for the party I'm volunteering someone to have. My family friends live 45 mins north of Milwaukee so we can make this work quite well.
Can my bastard 340i join?And yeah I think this will only fit a late model E39 or any one with the 4-1 manifolds.
WIbimmer v8.... Something. I don't know I'm sure we can come up with something catchy, as long as there is a sticker.
BMWCCA #499464
Current - 1995 540i/6 V 2.0 | Dead - 1995 540i/6 | Sold - 1995 318is
-
Can my bastard 340i join?
And yeah I think this will only fit a late model E39 or any one with the 4-1 manifolds.
I think we can open it up to any M60/62 engines. What do you think Ben? And you are correct, early model E39's like mine and Zach's have two 2-1 manifolds per side in place of a 4-1 manifold.
Well we can bring your exhaust over and cut it up just to get it done or you can come for the party I'm volunteering someone to have. My family friends live 45 mins north of Milwaukee so we can make this work quite well.
WIbimmer v8.... Something. I don't know I'm sure we can come up with something catchy, as long as there is a sticker.
Still not completely set on the exhaust route I plan to take, but I can do the party! Out of curiosity, where is your friend's place?
-
Still not completely set on the exhaust route I plan to take, but I can do the party! Out of curiosity, where is your friend's place?
Umm crap, I think it Grafton. Not 100% sure but it probably close to you guys and I'm willing to drive around especially if I just made my car all sexy sounding
BMWCCA #499464
Current - 1995 540i/6 V 2.0 | Dead - 1995 540i/6 | Sold - 1995 318is
-
Umm crap, I think it Grafton. Not 100% sure but it probably close to you guys and I'm willing to drive around especially if I just made my car all sexy sounding . I concur, m60/62 clan. Just need a catchy name because 540 gang was just so great then sticker design can happen at the party this winter.
That is very close to both of us, and actually where both Zach and I work. So there are plenty of places where we could meet and go for a drive. I will have to take the e34 though, which kind of defeats the purpose of a m60/62 clan meet haha. We will think of a sticker design I'm sure.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login