Chapter GMW | E30 LS1 (starting on post #1427)
-
Need to do this: http://e30.bmwdiy.info/indy-fogs/
And wire up my city lights with the dims.
@DrLeadFoot
-
Installed my e30m3 wiring cover.
Other random pics:
Curiosity of Billy:
Mileage pic:
Needs this:
@DrLeadFoot
-
Beep Beep!!
-
Beep Beep!!
you've opened a can of worms.
The "Meep Meep!!" people and the "Beep Beep!!" people are going to slaughter eachother now.
-
Well if you look close at an actual road runner, it says beep beep on it. Not meep meep. Read a book!
-
Polished up my rear passenger wheel a bit. It was pretty nasty due to the sticking caliper.
Bolted down my ecu to replace the zip ties that were holding it in there. However, couldn't get away from the ties to secure the PA system. I'll rig something up that's not sketch in the future.
Back in business! !
@DrLeadFoot
-
"Imma break into this car and steal the..... DAMNIT. Someone beat me to it!"
No guess work going on here.
I had my buddy rip it open because the lock froze and I needed to get in there. I have a new one ready to install but it is further down on the to do list.
@DrLeadFoot
-
A couple of photos from Lake Mills Cars and Coffee.
@DrLeadFoot
-
So my clutch doesn't like the boost at 18 psi. I do, but it really doesn't one bit.
It slips in 4th and 5th but spins tires through the other gears. It has a chattering feel and the revs go up but the mph do not.
I think it is bull#€£%# because it's a southbend stage 4 unless the seller lied. Going to get a southbend stage 5 and call it a day.
When it doesn't slip it is insanity!!
@DrLeadFoot
-
I'm sure it isn't too smooth. But it feels strong.
I'll have to look back to what I have. Not too sure because I bought it used and can't remember what I got in there.
@DrLeadFoot
-
-
Why are you still messing with junk clutches. Get the UUC twin disc and call it a day. Will also feel a lot better on your foot as it feels like factory.
Have you seen proven results??
@DrLeadFoot
-
First I'm going to bleed my slave cylinder and look into a braided line. Just to be sure, ya know?!
@DrLeadFoot
-
Air in the system wouldnt have an effect on clamping force, thats all in the pressure plate. It would only prevent it from releasing all the way. But you already know this. So im going over here now. Bye
Darn, I had a feeling that might not do the trick.
@DrLeadFoot
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login