ClassE 1989 325IS Build Thread
-
Not a bad day today. Got the trailing arm bushings and diff bushings out, adjusted the coil heights to where I "think" they're gonna be, and did some much needed cleaning in the garage.
Tomorrow night is installing all the brake lines and getting the new bushings in the rear end!
-
With the exception of the passengers line - all the original rubber lines came out like a friggen dream. Passenger front took alittle more elbow grease and my big boy panties to break loose (didn't help it was a bench/tri day so pushing was a chore). So all new stainless braided lines are installed!
When we were bleeding some of the fluid out when disconnecting the rear lines - we pumped the brake pedal alittle bit. The passenger front piston had pushed itself out of the caliper - should I be concerned about it? It pushed back in relatively easily (what I consider to be adequate pressure to get back in). I'm thinking this is normal from pumping the brakes? I believe that was the only caliper disconnected from the carrier at the time (which is why the drivers didn't push out as well). Thoughts?
-
Looks like proper rubber that wont be stretched.
Yeeaahh..... Nnoooo. It's gonna stretch.
Falken 912's, I've had really good luck with the 512's and 912's for years.
-
They'll be a 205/40 on 9's all around (with that width - a "proper" tire would cause clearance/fender issues and not allow the ride height I want). I'm also partial to alittle stretch for a nice flush fitment.
Wheels should be back from paint early next week, getting closer every night to rolling next weekend for alignment and some fun!
-
ive bought a few sets of 512's but i couldnt get more than 10k miles out of them with rotating them frequently and everything properly aligned… but at $45 a tire, who can really complain. haha
-
Those wheels with properly sized tires on that car... that's going to be awesome!
-
Well, 2 out of 3 isn't bad.
I guess I somehow missed the post where you said 205. Car looks great! -
wow, those wheels are awesome! they are like a Hartge design with a lip.
Proper sized tires would be 235's or 245's on a 9" wide wheel IMO.
I may try 255's
I have 205's now that came on my authentic STR wheels (not fake STR's)#allforlooks
#eurohatch
#f***yourfakewheels
#stretchedbutthoal -
Without fender flares tho on a 9" wheel in front - the offset needs to be low enough to clear the coils (ET10ish). That width and offset + 235/245-anything will never fit under the stock fenders (without 4x4 height).
I know the stretch/low isn't for everyone - but it is my preference.
-
Even if people are into different stuff. Anyone who calls himself a car guy can respect the time and effort put into a project.
Looks good man. Can't wait to see it in person.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login