Chapter GMW | E30 LS1 (starting on post #1427)
-
Update:
My ICV connector to the head is still popping out when boosting after I installed a new one. I have to figure out how to latch that thing down. I don't want to do epoxy so maybe some RTV and strap her down. Ideas TJ?
The hood is on
Things to do:
-Tap my valve cover to 3/4 NPT and pray that the AN fittings clear my fuel rail and that I don't crack the cover!
-Install the fuel pressure regulator and crank her up to 60#.
-Wire up the dimmer lights for the boost and oil pressure gauge.
I should get these tasks done this week!
Doctor Out.
@DrLeadFoot
-
3rd is squealing like the dude in Deliverance.
HAHAHAHAHA
this is the best thing I've ever read on here.
-
Make sure that icv connector is actually seating correctly and clipping in. I'd try a bit of rtv if all else looks good. At least you'll still be able to remove it if you need to.
I did. The top part pops out I think a zip tie and some rtv should do the trick.
@DrLeadFoot
-
Zip tie and some RTV. Man. That's gangster
It really goes with the theme of the whole build.
Sent from my SCH-I535 using Tapatalk
@DrLeadFoot
-
-
It looks like it fits very well!
Y U NO GET BLACK ELBOWS
That's all Pegasus had. Trying to support the local business. Maybe in the future.
Sent from my SCH-I535 using Tapatalk
@DrLeadFoot
-
I love that place.
Me too. They have been a huge help throughout this build. I walk in like a blind child and walk out like I won 24 hours of Le Mans.
Speedholes FTW! Looks good Jsir
Haha. Thanks!!
Sent from my SCH-I535 using Tapatalk
@DrLeadFoot
-
-
I have to remain seated to view this image.
Take a load off!
@DrLeadFoot
-
-
Do you have some smoked hellas?Yes Sir! With crosshairs.
Sent from my SCH-I535 using Tapatalk
@DrLeadFoot
-
The M3 is in the garage on a jack stand awaiting a new passenger caliper or a front BBK to replace the frozen caliper. I'd like to do the BBK route but sourcing a used set seems like it will take some time so Concours here I come!
Pic to come.
Now the real test. Daily the E30!! Kind of excited, not going to lie. My first appointment today is with a job relocation via Johnson Controls and I guess the guy is originally from Germany. Will the E30 do the selling for me?? We shall see.
@DrLeadFoot
-
Exciting!
Are those the flares that Kamotors is selling and if so what "size" are they? They look real good.
How much did you remove off the wheel arches, maybe an inch or two?AAAAAND
Do you have offset front lower control arm bushings / do you have low speed rubbing issues on u-turns like I do?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login